EdMorris Posted May 15, 2008 Share Posted May 15, 2008 Looking at my soop the other day after cleaning I noticed that the front of the bonnet on the passenger side sits a little higher than the drivers side. Seems to be that its not held down correctly. Any suggestions, as I can't seem to find anything amiss? Link to comment Share on other sites More sharing options...
ShamelessTT Posted May 15, 2008 Share Posted May 15, 2008 Have you checked the rubbers are adjusted on the right / left of the engine bay corners. (They twist up /down). Link to comment Share on other sites More sharing options...
spidermonkey Posted May 15, 2008 Share Posted May 15, 2008 if you give it a little push it should 'click' down - remember don't push too hard as the bonnet is aluminium Link to comment Share on other sites More sharing options...
EdMorris Posted May 15, 2008 Author Share Posted May 15, 2008 Not checked the rubbers, will do that. When I push down, the bonnet just springs back. Thanks for replies. Link to comment Share on other sites More sharing options...
dini_the_owl Posted May 15, 2008 Share Posted May 15, 2008 the rubbers should actually screw in/out Link to comment Share on other sites More sharing options...
hiten55 Posted May 15, 2008 Share Posted May 15, 2008 i never knew they did that! * goes out to check his bonnet, then realises the cars at the mechanics * Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now