tooquicktostop Posted May 11, 2008 Author Share Posted May 11, 2008 Hehe. Too impatient! Be careful with those injectors mate. I've got them, and as Ryan and I have found they're a pig to control at the low duty cycles you get at idle. I've been running mine with an AEM and the stock resistor pack to sort the impedance out. When my engine goes back in, I'm junking the stock resistor pack and using a peak and hold injector driver. Might be worth bearing in mind if you're going with the AEM..... Best of luck! I have taken advice from Ryan on these, I have a Heckler made resistor pack and AEM, will see how they perform soon enough Link to comment Share on other sites More sharing options...
TLicense Posted May 11, 2008 Share Posted May 11, 2008 Link to comment Share on other sites More sharing options...
SilverSoop Posted May 11, 2008 Share Posted May 11, 2008 Ooh very nice! Im going up to Phoenix onf riday to have my decat fitted so if your supe is still there, i'll have a quick peak! Link to comment Share on other sites More sharing options...
Guest Reaver_ Posted May 15, 2008 Share Posted May 15, 2008 Car is looking great mate. can't wait to see it at some of the shows over the summer. Its given me something to aim for too, after i've seen off the last of my teething problems May need a few more years before the missus lets me spend what you have on the car though lol Link to comment Share on other sites More sharing options...
Guest Nicholas Posted May 15, 2008 Share Posted May 15, 2008 Looks fantastic Dean can't wait to see a video of the beast Link to comment Share on other sites More sharing options...
tooquicktostop Posted June 13, 2008 Author Share Posted June 13, 2008 Spoke with Mark today, he has finished !! :D:eyebrows: Engine will be fired up Monday morning, then its run for a couple of hours on and off to get some heat cycles through it then its off for an MOT and I get the keys Wednesday, cant wait See you all on Sunday Link to comment Share on other sites More sharing options...
jevansio Posted June 13, 2008 Share Posted June 13, 2008 Nice one Dean, over the moon for you Link to comment Share on other sites More sharing options...
razza Posted June 13, 2008 Share Posted June 13, 2008 congrats mate, bet you're glad to get it back:d Link to comment Share on other sites More sharing options...
Lebsteif Posted June 13, 2008 Share Posted June 13, 2008 Finally back on the road! Link to comment Share on other sites More sharing options...
MrRalphMan Posted June 14, 2008 Share Posted June 14, 2008 Good news Dean, bet you cannot wait... Link to comment Share on other sites More sharing options...
mr keef Posted June 14, 2008 Share Posted June 14, 2008 looking good mate:) Link to comment Share on other sites More sharing options...
lui Posted June 14, 2008 Share Posted June 14, 2008 Nice one Dean mate looking foward to see at at Japshow next weekend & hope all goes well with runing her in Link to comment Share on other sites More sharing options...
grahamc Posted June 14, 2008 Share Posted June 14, 2008 about time Good luck, should be well worth the wait!!! Link to comment Share on other sites More sharing options...
colsoop Posted June 14, 2008 Share Posted June 14, 2008 Good news for you. I bet your like a kid at christmas Link to comment Share on other sites More sharing options...
JamieP Posted June 17, 2008 Share Posted June 17, 2008 Nice one mate, bet you cant wait for tomorrow, are you taking it to japshow sunday? Link to comment Share on other sites More sharing options...
tooquicktostop Posted June 17, 2008 Author Share Posted June 17, 2008 (edited) Nice one mate, bet you cant wait for tomorrow, are you taking it to japshow sunday? Can't wait indeed, it will be coming to Japshow this Sunday all being well with the MOT tomorrow Edit Wont be ready for the Pod now, have to come in the NA : ( Edited June 19, 2008 by tooquicktostop (see edit history) Link to comment Share on other sites More sharing options...
tooquicktostop Posted June 19, 2008 Author Share Posted June 19, 2008 Will be coming in the NA Sunday now as the car will not be ready Link to comment Share on other sites More sharing options...
Steve Posted June 19, 2008 Share Posted June 19, 2008 What happened mate? Link to comment Share on other sites More sharing options...
tooquicktostop Posted June 19, 2008 Author Share Posted June 19, 2008 What happened mate? Did not get the base map done as planned as the lap top did not have the right cable or something, the car needs the fans mapping in also as well as an engine map tweak The car then needs an MOT and tax and................. oh yes the heater matrix has popped so we have had to bypass that, all in all I have run out of time to get this done as I am working until Sat night bloody thing will be up for sale if its not careful Link to comment Share on other sites More sharing options...
MrRalphMan Posted June 19, 2008 Share Posted June 19, 2008 Oh man, that's bad news dude.... What you doing in work on Saturday? Link to comment Share on other sites More sharing options...
lui Posted June 19, 2008 Share Posted June 19, 2008 Did not get the base map done as planned as the lap top did not have the right cable or something, the car needs the fans mapping in also as well as an engine map tweak The car then needs an MOT and tax and................. oh yes the heater matrix has popped so we have had to bypass that, all in all I have run out of time to get this done as I am working until Sat night bloody thing will be up for sale if its not careful Sorry to hear about all these faults mate so will see ou in the N/a Sunday at Toddington & hopefully will be all ready for next meet at the Ace Cafe Mid Summer Supra only night Tuesday 22nd July Link to comment Share on other sites More sharing options...
gaz1 Posted June 19, 2008 Share Posted June 19, 2008 gutted for you dean:( i know you were looking forward to having her for the pod Link to comment Share on other sites More sharing options...
mr lover Posted June 19, 2008 Share Posted June 19, 2008 bad luck mate Link to comment Share on other sites More sharing options...
tooquicktostop Posted June 19, 2008 Author Share Posted June 19, 2008 Cheers guys, I will get there in the end Link to comment Share on other sites More sharing options...
Ryan.G Posted June 20, 2008 Share Posted June 20, 2008 Im working in surrey today Dean so if Mark is still around when i finish i will pop in and get it ready for running in. Just the MOT to get done tomorrow and then jap show is still on. Ryan Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now