Stratty Posted May 1, 2008 Share Posted May 1, 2008 I recently had some overfenders made and taped them to the car to see what they will look like. Question is, how do you deal with the big gap between the original wheel arch and the overfender? Do the arches have to be rolled first? Ta for your help.. Link to comment Share on other sites More sharing options...
jazz1 Posted May 1, 2008 Share Posted May 1, 2008 you will need some massive wheels, i think you need to cut the arch. Oh and before you fit them look at your car from a very long distance from the rear as that might change your mind about fitting them:d, i should of done that but i made a big mistake Link to comment Share on other sites More sharing options...
Stratty Posted May 1, 2008 Author Share Posted May 1, 2008 you will need some massive wheels, i think you need to cut the arch. Oh and before you fit them look at your car from a very long distance from the rear as that might change your mind about fitting them:d, i should of done that but i made a big mistake Really ???? I havent had a look from the rear. What is the problem with it? I was wondering about the wheels also. I didnt know if I had to fit REALLY wide wheels of have wheel spacers on it. Does anyone know? Ta. Link to comment Share on other sites More sharing options...
Mr. Fish Posted May 1, 2008 Share Posted May 1, 2008 the arches are normally cut, and then the overfenders put on....dont run wheel spacers, get a proper set of wheels so they fill out the arches properly. Link to comment Share on other sites More sharing options...
jazz1 Posted May 1, 2008 Share Posted May 1, 2008 wheel spacers would be a bad option unless you go for 12" wide wheels, theres no point in sticking 3" spacers:blink:. I never loved my overfenders as the supra alone is a wide car and i prefer the look of the standard rear, youl see what i mean if you look at them from a distance, i was so relieved when i took mine off:D Link to comment Share on other sites More sharing options...
Stratty Posted May 1, 2008 Author Share Posted May 1, 2008 Hmmm..... Maybe it isnt a good idea to stick them on.. I saw a few pics of cars with them on and they looked nice but from what has been said I will have to have a good hard think about it. Having to get massive wheels is gonna cost a small fortune as well I would imagine.. Link to comment Share on other sites More sharing options...
jazz1 Posted May 1, 2008 Share Posted May 1, 2008 dont get me wrong they do look good in pics and from angles but do what i said and have a look with them on from a long distance from the rear, the car just looks very fat and out of shape;), less is more. Link to comment Share on other sites More sharing options...
Pabs Posted May 1, 2008 Share Posted May 1, 2008 I have the arches rolled on my car, with the overfenders. Running 10" wheels with large spacers (currently) but I think when I get enough money I'll be changing my wheels as they don't fill the arches enough IMO. Doesn't look too bad, but noticable. Link to comment Share on other sites More sharing options...
heckler Posted May 1, 2008 Share Posted May 1, 2008 I had my arches cut, and the overfenders blended into the skirts/spats. I have 25mm spacers on (waits for the flack) and the wheels fit the arches fine. http://www.internetwork.org.uk/sideshot.jpg Link to comment Share on other sites More sharing options...
Ibrar Jabbar Posted May 1, 2008 Share Posted May 1, 2008 you will need some massive wheels, i think you need to cut the arch. Oh and before you fit them look at your car from a very long distance from the rear as that might change your mind about fitting them:d, i should of done that but i made a big mistake Look good from the rear IMO when fitted correctly with a proper set of rims. Link to comment Share on other sites More sharing options...
Mr. Fish Posted May 1, 2008 Share Posted May 1, 2008 i think they look also Link to comment Share on other sites More sharing options...
jazz1 Posted May 1, 2008 Share Posted May 1, 2008 could of been my wing i gues, the trd does look nice Link to comment Share on other sites More sharing options...
Pabs Posted May 1, 2008 Share Posted May 1, 2008 Look good from the rear IMO when fitted correctly with a proper set of rims. http://i140.photobucket.com/albums/r15/proboost/ProSupra045.jpg Looks fappin awesome, does that! I've been pointed in your direction REF wheel sizes and recommendations for these overfenders, so when I have some dosh I'll drop you a line! Link to comment Share on other sites More sharing options...
SilverSoop Posted May 2, 2008 Share Posted May 2, 2008 I recently had some overfenders made and taped them to the car to see what they will look like. Question is, how do you deal with the big gap between the original wheel arch and the overfender? Do the arches have to be rolled first? http://i203.photobucket.com/albums/aa122/si2468/DSCN0534.jpg Ta for your help.. I have a set of 265/35/18's on my car with some big spacers, the tyre goes to the edge of the wheel arch. If you want to save cash, get some 295/35/18 or 19's and fit some spacers on it too... Link to comment Share on other sites More sharing options...
Stratty Posted May 2, 2008 Author Share Posted May 2, 2008 Thanks for all the responses. Does anyone know what wheel size I would need to fill the arches without using spacers? I just want to see what the difference in price will be. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now