supra_si Posted May 1, 2008 Share Posted May 1, 2008 after noticing that my positive clamp was made of butter and didnt really hold anything to the battery ive bought 2 new clamps. the quetsion is how do i get the cable out of the original clamps as they have been drimped on good n proper. has anyone else done this? Link to comment Share on other sites More sharing options...
DamanC Posted May 1, 2008 Share Posted May 1, 2008 I used a flat head driver and lots of patience. Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted May 1, 2008 Share Posted May 1, 2008 When i changed mine, i just cut and reshaped the crimped on connector's, then bolted them to the new clamps. Link to comment Share on other sites More sharing options...
supra_si Posted May 1, 2008 Author Share Posted May 1, 2008 aii thats an idea cheers Link to comment Share on other sites More sharing options...
markus99 Posted May 1, 2008 Share Posted May 1, 2008 if theres enough slack on the cable your better cutting it back and stripping a fressh bit of cable Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted May 1, 2008 Share Posted May 1, 2008 if theres enough slack on the cable your better cutting it back and stripping a fressh bit of cable Unfortunately there is not, so it a new piece of cable and terminals, then solder it, then bolt to the new battery terminals, or the quick cheap way;) Link to comment Share on other sites More sharing options...
vvteye Posted May 1, 2008 Share Posted May 1, 2008 or there's my method... Cut the cable then realise that it's not long enough for the new terminal. Link to comment Share on other sites More sharing options...
T2 MSW Posted May 1, 2008 Share Posted May 1, 2008 Where did you get the new terminals from?? Link to comment Share on other sites More sharing options...
supra_si Posted May 1, 2008 Author Share Posted May 1, 2008 off ebay but im not convinced as they are just bolt down ones. if i can cut the original plate and drill 2 holes in i can bolt it down that way. thought it was gonna be an easy job Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now