richard cash Posted April 30, 2008 Share Posted April 30, 2008 I am in the process of putting a wide arch kit on my supra, however, the rear near the petrol cap area is widened by approx 4inches. Does anyone have any ideas what i should do about extending the petrol pipe as i want to keep the flap flush. Some pictures would be nice too Quote Link to comment Share on other sites More sharing options...
Jake Posted April 30, 2008 Share Posted April 30, 2008 FOUR INCHES? ! What kit is that then? The flap isn't connected to the pipe anyway. Quote Link to comment Share on other sites More sharing options...
richard cash Posted April 30, 2008 Author Share Posted April 30, 2008 well it maybe not that much, im not by the car right now, could only be 2.5 or so, but anyway, the problem is that i dont know if i need to extend the pipe to come out nearer the flap or not. Quote Link to comment Share on other sites More sharing options...
SupraAyf Posted May 1, 2008 Share Posted May 1, 2008 Simon's (lockys96) JGTC kit didn't need a fuel filler extension and it sounds as if it was as big as yours. I don't think you should need to modify the fuel filler TBH mate. Si may come along in any minute soon in order to clarify;) Quote Link to comment Share on other sites More sharing options...
Dnk Posted May 1, 2008 Share Posted May 1, 2008 Mines not extended but its not 4" wider either, approx 2" eachside on the TRD kit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.