Markie Posted February 7, 2005 Share Posted February 7, 2005 I have been reading some threads about the FPR's and just wondered if this this would do the same job.. Hopefully the engineers here will be able to crack the code in which the description of this is written (Picture Attached) The Aeromotive A1000-6 Injected Bypass Regulator was developed for high horsepower EFI applications. Compatible with the Aeromotive A1000 Fuel Pump, this regulator is a cousin to our widely-used A1000 Injected Bypass Regulator, delivering performance, long-life, and reliable operation. Base pressure (vacuum/boost disconnected) is adjustable from 30 to 70 PSI. Alcohol compatible. Provides two -6 AN inlet ports and one -6 AN return port. Fuel pressure will rise on a 1:1 ratio when referencing boost. 1/8" NPT gauge port. Beautifully finished with type II bright red and clear anodized coatings. Applications: For high horsepower EFI applications where -6 AN fuel lines are used for supply and return. Link to comment Share on other sites More sharing options...
Nic Posted February 7, 2005 Share Posted February 7, 2005 Yes the Aeromotive fuel pressure regulator is used by quite a few members and is one of the best quality makes available. Contact Vortex in the traders section they should be able to sort you out with one. http://www.vortexpower.co.uk/fuelling.htm Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now