gavin.starr Posted August 3, 2008 Author Share Posted August 3, 2008 hi all, ive just bought this, are they any good, also do i have to take off standard valve, i would like to get ahold of the blitz pipe that goes in the stock position but cannot find them anywhere. http://i331.photobucket.com/albums/l462/supraGZaerotop/blitzdd.jpg mine used to be like that. i ran it wite the standard bov installed whith no probems. i only changed it because of the new pipe on the fmic wouldnt fit it there, so i had to make a pipe out of copper pipe and fit it where the standard one goes. Quote Link to comment Share on other sites More sharing options...
Jim_1979 Posted August 3, 2008 Share Posted August 3, 2008 My standard bov makes a vent to atmos type noise. Not as loud as a proper vent to atmos bov. I've noticed it since putting my chargespeed bonnet on the car. Is it simply as loud as it ever was, simply I can hear it now because of the vents in the bonnet etc? Quote Link to comment Share on other sites More sharing options...
supraGZaerotop Posted August 6, 2008 Share Posted August 6, 2008 This is how the Blitz BOV kit fits on the Supra, don't think you can buy the fitting kit separately though. Your best bet would be to buy a flange and weld onto the IC hard pipe, either before or after the FMIC. http://mkiv.com/techarticles/blitz_bov_new/01%20022.jpg looky what i found http://www.blitz-uk.co.uk/ProductItem-332.aspx Quote Link to comment Share on other sites More sharing options...
Jim_1979 Posted August 6, 2008 Share Posted August 6, 2008 That's all very good. I've already got the BOV, just need the fitting kit part. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.