miles Posted April 20, 2008 Share Posted April 20, 2008 Trying to fit a LSD to my supra which is an sz '95 facelift (no lsd as standard.) I have a new one, complete (outer casing etc..) The old open diff is out, but when we tried fitting the new one the flanges that the half shafts go onto were different (larger diameter by about 4mm, and large threaded holes for the bolts.) http://www.mkivsupra.net/vbb/showthread.php?t=147259&highlight=lsd As said in the thread it is off of an n/a. So what needs doing? do the flanges need taking off of the old diff and putting onto the new one? (Really want to get this done today so that the car can be used tomorrow...Any help will be much appreciated ) Link to comment Share on other sites More sharing options...
miko_supra Posted April 20, 2008 Share Posted April 20, 2008 i was helping miles with this earlier. Turns out the face lift diffs are different and we need to get some different half shafts to fit Link to comment Share on other sites More sharing options...
Jezz Posted April 20, 2008 Share Posted April 20, 2008 Replied in the other thread. I've got loads of shafts, esay enough to change too. Give me a shout if needed. Link to comment Share on other sites More sharing options...
miko_supra Posted April 21, 2008 Share Posted April 21, 2008 i tried taking the the shafts off of the hub on mine and they were impossible, i tried about 6 ft of extension and tried getting the nut red hot with a blow torch but still no joy. But we shall give them a go on miles's car Link to comment Share on other sites More sharing options...
CarlT67 Posted April 21, 2008 Share Posted April 21, 2008 i tried taking the the shafts off of the hub on mine and they were impossible, i tried about 6 ft of extension and tried getting the nut red hot with a blow torch but still no joy. But we shall give them a go on miles's car We'll just have to use a calibrated tap on the nut with miles special watch makers hammer lol http://xs226.xs.to/xs226/08171/hammer657.jpg Link to comment Share on other sites More sharing options...
miko_supra Posted April 21, 2008 Share Posted April 21, 2008 http://xs226.xs.to/xs226/08171/silly_sounds_hammer602.gif Link to comment Share on other sites More sharing options...
CarlT67 Posted April 22, 2008 Share Posted April 22, 2008 http://xs226.xs.to/xs226/08171/silly_sounds_hammer602.gif That would have been more useful, with at least more weight behind it lol Link to comment Share on other sites More sharing options...
miles Posted April 25, 2008 Author Share Posted April 25, 2008 Look it done the job didnt it, youve just not got the muscles to use a quality tool like that Link to comment Share on other sites More sharing options...
miko_supra Posted April 25, 2008 Share Posted April 25, 2008 yawn, this thread is like half a week old. miles if your going to be a member here then you need to log in at least 5 times a day and keep up to date with recent threads... anyways you getting these half shafts or what? Link to comment Share on other sites More sharing options...
miles Posted April 26, 2008 Author Share Posted April 26, 2008 sorrrryyyyy! lol. yeah the half shafts are next on the list after i have paid the credit card off, then getting the skirts sorted, polished it today and realized how mullered they are! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now