Guest MarkPayne Posted April 20, 2008 Share Posted April 20, 2008 Hi All It am new to the Supra and I have a 1998 VVTi Tip. It has the HKS induction which I have been advised is not too good for the car. I have bought a second hand airbox from a member here (cool) but I have a missing bit (opps)! I need the rubber pipe that goes from the air box to the alloy Ysplit shown by the white line on the "Gap" pic: I guess this pipe must house the air low meter that I see attached to the HKS pipework (Air Flow Pic) but I cannot see where it goes? I have attached a pic (Standard) from the Garage of another member showing the standard pipe but I assume that the air flow bit is under the pipe? I have tried to make the HKS bits fit to do the job but that is not going to work! Could anyone help me here with the part I need? Have I got this right? Thanks for your help Mark Link to comment Share on other sites More sharing options...
styggen82 Posted April 20, 2008 Share Posted April 20, 2008 The air flow meter is mounted just after the filter.... Link to comment Share on other sites More sharing options...
styggen82 Posted April 20, 2008 Share Posted April 20, 2008 BTW, is the airbox you`re putting in from a vvti car? Link to comment Share on other sites More sharing options...
Guest MarkPayne Posted April 20, 2008 Share Posted April 20, 2008 BTW, is the airbox you`re putting in from a vvti car? Argh NO! You have just taught me an important lesson I think! I am now going to guess that the pre VVTi car does not have this air flow meter and the air box is different So I have scored a home goal and I have the wrong box. Damm. Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now