flyby Posted April 19, 2008 Share Posted April 19, 2008 My engine blowed up to day... what a perfect day Link to comment Share on other sites More sharing options...
wewsupra Posted April 19, 2008 Share Posted April 19, 2008 sorry to hear Link to comment Share on other sites More sharing options...
Gaz6002 Posted April 19, 2008 Share Posted April 19, 2008 What happened? Link to comment Share on other sites More sharing options...
flyby Posted April 19, 2008 Author Share Posted April 19, 2008 What happened? spun a rod bearing. I can see im not the only one what has this problem? http://cgi.ebay.com/ebaymotors/2JZGTE-Pistons-and-Rods_W0QQcmdZViewItemQQcategoryZ33623QQihZ007QQitemZ170211718907QQrdZ1QQsspagenameZWDVW Link to comment Share on other sites More sharing options...
flyby Posted April 19, 2008 Author Share Posted April 19, 2008 the engine was rebuld at 111890 5/4-06 today the it says 128.000miles. "removed engine?strip, Crankshaft work, supply ? fit new crankshaft, conrond? bearrings. Hone bores ? re-rings piston, replacment skim tappats to cylinder head. ..." The work was don a "Merseyside engine parts & repair specialist." Is it notmal to installe a new olie pump when "rebulding" a engine? Link to comment Share on other sites More sharing options...
robin Posted April 19, 2008 Share Posted April 19, 2008 I think some members have had to do engine rebuilds because the oil pump failed and sent bits of metal in to the engine. Also if you are going to all the trouble of a rebuild why risk it with an old oil pump? Link to comment Share on other sites More sharing options...
hodge Posted April 19, 2008 Share Posted April 19, 2008 I personally would fit an oil pump, better safe than sorry, if you have the engine to bits why not change it. If the oil pump fails you have to take the engine back out again and start all over again. More money and more time!!!!!!!!!!!!! Link to comment Share on other sites More sharing options...
flyby Posted April 19, 2008 Author Share Posted April 19, 2008 what is the price on a olie pump from toyota? Now i can take the enginee out, and rebuld it again. and properly the chankshaft need some regrinding too. aggg.. Link to comment Share on other sites More sharing options...
flyby Posted April 26, 2008 Author Share Posted April 26, 2008 Some pictures. Got a lot of copper in the bottom. It this ok for at burn our con bearrings? Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted April 26, 2008 Share Posted April 26, 2008 Wow! don't know about spun a bearing, more like totally ate it:blink: Link to comment Share on other sites More sharing options...
flyby Posted April 27, 2008 Author Share Posted April 27, 2008 Chep ACL berings http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=007&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=170211959511&rd=1 Everyone is broke, and it is only 12K since a rebuild. 1bar max boost. Se here: Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now