edge Posted April 14, 2008 Share Posted April 14, 2008 I am about to fit a sprung 6 puck clutch to a stock flywheel. But the friction plate center is a different length. Stock Rps Is this a real problem or will it fit fine? Link to comment Share on other sites More sharing options...
edge Posted April 14, 2008 Author Share Posted April 14, 2008 Ah sprung clutches and stock flywheels dont seem to get on to well then. So will this suit my needs better? http://www.mkivsupra.net/vbb/showthread.php?t=147189&highlight=flywheel Link to comment Share on other sites More sharing options...
styggen82 Posted April 14, 2008 Share Posted April 14, 2008 I use a ACT unsprung disk on a stock flywheel, works fine:) Link to comment Share on other sites More sharing options...
edge Posted April 14, 2008 Author Share Posted April 14, 2008 I have just got off the phone from rps in the states and they said it would be fine to use also. So more confused now. styggen82 - my problem is that my clutch disk IS SPRUNG Link to comment Share on other sites More sharing options...
styggen82 Posted April 14, 2008 Share Posted April 14, 2008 http://www.mkiv.com/techarticles/clutch/index.html maybe this will help? Link to comment Share on other sites More sharing options...
edge Posted April 14, 2008 Author Share Posted April 14, 2008 http://www.mkiv.com/techarticles/clutch/index.html maybe this will help? Nice link, thanks. Also thanks to whiffin for the advice. So looks like i can use it with the stock flywheel but may get a lightend one as its not a daily drive. Also didnt realise the clutches go in the other way round to stock. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now