Jim_1979 Posted April 10, 2008 Share Posted April 10, 2008 Just curious if you were at the strip for example, how do you go about launching the car? Obviously in a manual, you build the revs and drop the clutch. So what do you do in an Auto? Just sit there, then plant the foot? Surely it gets off the line rather slowly? Link to comment Share on other sites More sharing options...
paul mac Posted April 10, 2008 Share Posted April 10, 2008 Just curious if you were at the strip for example, how do you go about launching the car? Obviously in a manual, you build the revs and drop the clutch. So what do you do in an Auto? Just sit there, then plant the foot? Surely it gets off the line rather slowly? foot hard on the brake, build the revs up, lights change, mash the throttle and your off, a lot also depends on the stall of your torque converter as well, do a search mate as this has been covered many times Link to comment Share on other sites More sharing options...
Class One Posted April 10, 2008 Share Posted April 10, 2008 Do a search under "power braking" . Link to comment Share on other sites More sharing options...
jamesmark Posted April 10, 2008 Share Posted April 10, 2008 As Paul has said. Do not rev too high for too long. Link to comment Share on other sites More sharing options...
Gaz6002 Posted April 10, 2008 Share Posted April 10, 2008 Or use a catapult. Link to comment Share on other sites More sharing options...
Firestorm Posted April 10, 2008 Share Posted April 10, 2008 im probably being a numpty but i cant find anything under power breaking link anyone? (also im at work and cant spend ages flicking through pages!) Link to comment Share on other sites More sharing options...
Gaz6002 Posted April 10, 2008 Share Posted April 10, 2008 http://www.mkivsupra.net/vbb/showthread.php?t=136972&highlight=launching+auto http://www.mkivsupra.net/vbb/showthread.php?t=76649&highlight=launching+auto Link to comment Share on other sites More sharing options...
GoliathJay Posted April 10, 2008 Share Posted April 10, 2008 You asked the same question 2 years ago... Is somebody going senile? Link to comment Share on other sites More sharing options...
mikeyb10supra Posted April 10, 2008 Share Posted April 10, 2008 im probably being a numpty but i cant find anything under power breaking link anyone? (also im at work and cant spend ages flicking through pages!) Above in red is your problem Link to comment Share on other sites More sharing options...
Firestorm Posted April 10, 2008 Share Posted April 10, 2008 would a RLTC launch work for this aswel? so then if u wanan spin your wheels before hand this the same effect LOL yeh i noitices tha tbout half hour ago.. (my excuse was that class one spelt it that way) hehe Link to comment Share on other sites More sharing options...
mikeyb10supra Posted April 10, 2008 Share Posted April 10, 2008 would a RLTC launch work for this aswel? so then if u wanan spin your wheels before hand this the same effect LOL yeh i noitices tha tbout half hour ago.. (my excuse was that class one spelt it that way) hehe there is no excuses he he you will need a line lock kit to perform smoking burnouts makes it a lot easier anyway....but you dont want to be spinning your wheels for maximum launch potential, you want to be minimising this Link to comment Share on other sites More sharing options...
Gaz6002 Posted April 10, 2008 Share Posted April 10, 2008 there is no excuses he he There are no excuses Link to comment Share on other sites More sharing options...
Darragh Posted April 10, 2008 Share Posted April 10, 2008 im drag racing all the time and i tell ya its hard getti9ng the balance right ive only pulled it off once or twice for example you power build with the break on but the retard next to you moves of the white light delaying the start and before you no the back wheels are pure white with smoke (not bloody good) somtimes i find it easyier just to roll of the line normel and then nail it i.e. forget about your launch times and go for the 1/4 mile Link to comment Share on other sites More sharing options...
mikeyb10supra Posted April 10, 2008 Share Posted April 10, 2008 There are no excuses I will get my coat my excuse is that I was rushing to reply as I am at work he he Link to comment Share on other sites More sharing options...
Firestorm Posted April 10, 2008 Share Posted April 10, 2008 I will get my coat my excuse is that I was rushing to reply as I am at work he he i thought we said NO excuses lol didnt mean spinning wheels on take off i was meaning dont they require you to spin in some water before hand for grip?? and again what bout RLTC? i dont think il get a line lock.. maybe i mite but its bottom of my list. i like the sound of just booting it off the line.. we all know we can catch up.. plus we dont look like idiots when others ppl grind gear changes when they are changin to fast or badly cos of the adreline in the body. Link to comment Share on other sites More sharing options...
mikeyb10supra Posted April 10, 2008 Share Posted April 10, 2008 i thought we said NO excuses lol you got me bang to rights there Link to comment Share on other sites More sharing options...
paul mac Posted April 10, 2008 Share Posted April 10, 2008 and again what bout RLTC? i dont think il get a line lock.. maybe i mite but its bottom of my list. i like the sound of just booting it off the line.. we all know we can catch up.. plus we dont look like idiots when others ppl grind gear changes when they are changin to fast or badly cos of the adreline in the body. rltc lunch control will not work with the auto, it is essentially the way a manual would replicate an auto launch anyway , if you have a high stall and everything goes spot on at the lights your limitation will be the amount of grip and whether you can hold the thing in a straight line (if you have'nt got rltc), if you want a quicker launch off the line just booting it a high stall is the key whether you are single or BPU Link to comment Share on other sites More sharing options...
Darragh Posted April 10, 2008 Share Posted April 10, 2008 one other option is to let your rear tyres down a good bit however not to much as your gona be doing speeds off 100+ by the end of the strip so you cant be running flat a tyre but itll help her move of the line a bit quicker Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now