Jump to content
The mkiv Supra Owners Club

Pic


Supra Noodle

Recommended Posts

A few pic's from over the years.

 

I have had it since 2002 and it still looks as good today as it did back then. Just use a little Autosol every other week. No drone on the motorway* and good fitment so, don't have any issues over speed bumbs on stock UK spec suspension and then later, on the CW susension.

 

Very happy with it.

 

Hiper :flame:

 

*=Stock turbo's & Double decat.

Link to comment
Share on other sites

  • 2 weeks later...
I have a CW suspension which, is not very low and I don't have any problems over speed bumps :)

 

Does this pic help ?

 

http://www.mkivsupra.net/vbb/attachment.php?attachmentid=73456&d=1207405709

 

Jeez how do you reckon it will fair on mine

 

http://www.mkivsupra.net/vbb/vbpicgallery.php?do=big&p=8783

 

http://www.mkivsupra.net/vbb/vbpicgallery.php?do=big&p=8778

 

http://www.mkivsupra.net/vbb/vbpicgallery.php?do=big&p=8781

Link to comment
Share on other sites

is that stainless all the way thru or mild steel pipewrok and stainless box sharpie

 

It's been on the car since 2002 and looks just as good today.

 

I think the only fully S/S option was the HKS Priest at mega $$$ or to go for a custom job.... maybe the Blitz Nur, had just come out by then ???

 

Being fully S/S was not a high priority for me back then and isn't today, it was the sound 1st, clearance 2nd and looks 3rd.

 

Some systems are S/S but, hang low so, speed bumps are an issue, some are S/S and drone on the motorway, some are S/S and look cr@p .... IMO

 

HTH :)

Link to comment
Share on other sites

 

Looking at HKS's site, the pipe work dia is bigger on the dragger 95mm as opposed to 75mm for the Hiper.

 

http://www.hksusa.com/products/?id=663

http://www.hksusa.com/products/?id=715&rsku=3972

 

Part No. Application Tip dia (mm) Tip dia. Piping (mm)

 

Hiper = 3203-ST011 TOYOTA Supra 1993-1998 3.0 Turbo HP 115 75

Dragger = LET-T17 TOYOTA Supra 1993-1998 3.0 Turbo Dr 130 95

 

You can also push the pipework as close to the car as possible too, to give you that extra clearance.

Link to comment
Share on other sites

anyone know what the hks silent hi power is in db ? is it a good exhaust for bpu

 

It's a very good quality exhaust, despite the name though it isn't that silent, rated at 99Db (stock 87Db). It is basically the same exhaust as the Hi-Power, but unlike the Hi-Power is 100% stainless steel.

 

You can take the exhaust for a test drive here :)

 

http://www.hks-power.co.jp/sound/

Link to comment
Share on other sites

I have a HKS silent high power on the NA and it is louder than the superdragger on the single! Eve has the Nur Spec on her twin and still the Silent High Power is the loudest of the lot. The super dragger is terrible for clearence and the silent HP is considerably better clearance wise.

Link to comment
Share on other sites

  • 3 weeks later...
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.