SuperSupra Posted April 1, 2008 Share Posted April 1, 2008 Got a spot of rust on my rear wheel arch. The black trim around the wheel arches are not there as I took them off when I was due to fit my spats (before changing my mind) so maybe this is the reason. Certainly can't help anyho. Any advice on how to cure it? Is it likely to need anything other than a cover up respray? I've never had rust on a car before. Also also does anyone anywhere have the black covers for the rear wheel arches in tact. I know they're a pain to remove without damaging them! Link to comment Share on other sites More sharing options...
JustGav Posted April 1, 2008 Share Posted April 1, 2008 Depends, if it surface rust, you will need to sand the area down, treat it with rust treatment, and then sand/prime and finish... If it is through a panel, you really should cut out the bad bit and replace it. Link to comment Share on other sites More sharing options...
Roger Posted April 1, 2008 Share Posted April 1, 2008 As far as I can remember, Sand the rust off Get a rust neutralising agent or acid wash Primer Paint Link to comment Share on other sites More sharing options...
bignum Posted April 2, 2008 Share Posted April 2, 2008 You need to see if its come through from the inside, theres a double skin and if water gets in bingo rust, needs drying with hairdryer then treated/sealed/painted really. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now