Homer Posted March 15, 2008 Share Posted March 15, 2008 Looking at the attached pic, is this leak likely to just be the gasket between the master cylinder and the brake booster? There's a lot of surface rust so not sure if the brake booster itself needs swapping. Thoughts? Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted March 16, 2008 Share Posted March 16, 2008 Brake fluid has taken the paint off and rust has started. It MAY be the seals in the MC are leaking, you can even fill the servo up with fluid if you just keep topping up the fluid, it MAY be just spilt fluid from sloppy topping up. It shouldlnt affect the servo so long as no fluid is IN it, take it off and see if any drains out the vac hose grommet when you tip it upside down. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.