_Shane_ Posted March 14, 2008 Share Posted March 14, 2008 well i bought one off one of the lads on here about 2 weeks ago and went about fitting it today Its real hks dv and came with supra fitting kit The amount of work and modifying that had to be done to get this to fit as the stock place where is was ment to go it would not fit and the bonnet would not close Will get pics up tomor lol Link to comment Share on other sites More sharing options...
Rayman Posted March 14, 2008 Share Posted March 14, 2008 doesnt sound right to me, i fitted one recently and its pretty much like stock fitment. Link to comment Share on other sites More sharing options...
Steve Posted March 14, 2008 Share Posted March 14, 2008 doesnt sound right to me, i fitted one recently and its pretty much like stock fitment. Yep, mine was like stock fitment. Took around 10 minutes with a tea break too Link to comment Share on other sites More sharing options...
_Shane_ Posted March 14, 2008 Author Share Posted March 14, 2008 lol i wish mine was the same lads can ye post up pics please of your hks bovs fitted (if ye have pics) Link to comment Share on other sites More sharing options...
Steve Posted March 14, 2008 Share Posted March 14, 2008 lol i wish mine was the same lads can ye post up pics please of your hks bovs fitted (if ye have pics) Mine is no longer fitted, along with half of the engine Link to comment Share on other sites More sharing options...
_Shane_ Posted March 14, 2008 Author Share Posted March 14, 2008 Like it was the full kit i got from a member on here and everything was there and is workin 100% etc but fitting it, it just would not fit in where i had all my previous bov's Im uk spec but doubt that should make any difference Link to comment Share on other sites More sharing options...
jaymdee Posted March 14, 2008 Share Posted March 14, 2008 I just removed a nut from a stud on the Turbo manifold, placed the BOV fixing bracket over the stud. Attached BOV, then when got position right, tightened all nuts etc. The insulation on the underside of the bonnet does touch the BOV, but it's fine. 10 mins (and a cut finger!) Link to comment Share on other sites More sharing options...
Scott Posted March 14, 2008 Share Posted March 14, 2008 I bought the MKIII dump valve flange to have it mounted slightly different. It was a little tricky but it turned out exactly the way i wanted it. Is it possible you have the MKIII kit? It does need a bit of work though Scott =op Link to comment Share on other sites More sharing options...
_Shane_ Posted March 14, 2008 Author Share Posted March 14, 2008 this is the bov i have Link to comment Share on other sites More sharing options...
Scott Posted March 14, 2008 Share Posted March 14, 2008 Can you show it side on to see the flange? Scott =op Link to comment Share on other sites More sharing options...
_Shane_ Posted March 14, 2008 Author Share Posted March 14, 2008 will get pic tomor, that pic isnt even mine, it was from the guys thread who sold it to me on here Link to comment Share on other sites More sharing options...
Scott Posted March 14, 2008 Share Posted March 14, 2008 Thats the chap Link to comment Share on other sites More sharing options...
_Shane_ Posted March 14, 2008 Author Share Posted March 14, 2008 exact same flange as that one scott but its the previous ssqv (the one without the vents lol on the side) Link to comment Share on other sites More sharing options...
Scott Posted March 14, 2008 Share Posted March 14, 2008 Hmm, wonder why ur having trouble then. Scott =op Link to comment Share on other sites More sharing options...
_Shane_ Posted March 15, 2008 Author Share Posted March 15, 2008 will get pics up tomor Link to comment Share on other sites More sharing options...
Tones Posted March 15, 2008 Share Posted March 15, 2008 fitted 2 of them on supras, they fit alright man,took me about 15mins, think i had to face mine the other way round too Link to comment Share on other sites More sharing options...
_Shane_ Posted March 15, 2008 Author Share Posted March 15, 2008 this is fitted since earlier tonight but it bov is right up the back lots of work had to be done with other hoses and getting them to fit tru gaps etc some dose i tell ya. There is another flange coming off piping by the air filter pipe and that flange is blocked up, thats what obstucting it from going in that position as i think someone tried to have 2 bovs fitted lol Link to comment Share on other sites More sharing options...
_Shane_ Posted March 15, 2008 Author Share Posted March 15, 2008 blew the hoses off the dump valve today, they popped completely, tore right through the hose lol Dump valve out of car now till i find some new hose Link to comment Share on other sites More sharing options...
_Shane_ Posted March 15, 2008 Author Share Posted March 15, 2008 As you can see from the engine bay pic my old blitz bov fitted in no problems but when i went to fit the hks in it simply would not fit, the peice up top circled red is blocking the hks bov from fitting into position Dont think the top flange should be there its blocked off but its in the way Link to comment Share on other sites More sharing options...
Scott Posted March 15, 2008 Share Posted March 15, 2008 Can you not shorten the top bit a little? Scott =op Link to comment Share on other sites More sharing options...
_Shane_ Posted March 15, 2008 Author Share Posted March 15, 2008 you cant see from that pic but last night when i fitted the bov i relocated it to up the back and it was grand but today the hoses cracked/tore snapped everything lol ID is 19mm and i need about 15'' to cover distance, lookin on ebay now at the moment Link to comment Share on other sites More sharing options...
Nic Posted March 16, 2008 Share Posted March 16, 2008 In your pic, the pipe blocking off where the stock BOV recirculates is too long. Here are some pics to show how it should fit. http://img152.imageshack.us/img152/6641/dscn1545ho1.jpg http://img152.imageshack.us/img152/8767/dscn1544lh2.jpg http://img404.imageshack.us/img404/9629/dscn1550yw1.jpg Link to comment Share on other sites More sharing options...
wile e coyote Posted March 16, 2008 Share Posted March 16, 2008 Hers mine fitted i had to shorten the metal pipe that comes with it to make it fit Link to comment Share on other sites More sharing options...
tango Posted April 6, 2008 Share Posted April 6, 2008 what sound does these hks made? Link to comment Share on other sites More sharing options...
hodge Posted April 6, 2008 Share Posted April 6, 2008 If fitted loads of these and there stock fitment. All i can think is that you've put it on the wrong side of the turbo pipe. I refitted a 1 for a friend not long ago who put it on the wrong hole, it wasnt in correctly and looked totaly out od place. It attatched to the hole closest to the front of the car when you take the stock recirculating valve out. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now