johnd-mkiv Posted March 7, 2008 Share Posted March 7, 2008 Im going to be putting the gearbox back in on sunday with a twinplate os giken clutch, just wondering the best way of fitting it back in as getting it out with a standard clutch was a mission enough. Was probably going to drop the front cross member a bit then tilt the engine to gain a bit more clearance, is this the best way? also does any one have the torque settings for flywheel bolts? osgiken cluch assembly? A fitting guide for the clutch would be handy aswell thanks Quote Link to comment Share on other sites More sharing options...
Lebsteif Posted March 7, 2008 Share Posted March 7, 2008 Here's some information: http://mkiv.com/manual/manualtt/clutch_replacement/index.html Quote Link to comment Share on other sites More sharing options...
D8MOA Posted March 7, 2008 Share Posted March 7, 2008 pay me and i will do it for u lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.