CJ Posted March 7, 2008 Share Posted March 7, 2008 But it was a built box Colin Dont get me wrong mate if it could be done with out the Aem reliably then i would do it with a Motec or a Link mate I'm sorry.I didn't realise that there was a difference due to the built box. I assumed as it was an auto box it would have been the same. So, just to clarify. If it is a built box then the standard Toyota Auto Box ECU will be OK to use but if it is a standard Toyota box, then it isn't? Link to comment Share on other sites More sharing options...
Wez Posted March 7, 2008 Share Posted March 7, 2008 Mark erm...I cannot remember his second name now. Mark Sheady maybe? For an auto I would recommend an AEM as well, the deal muffleman is offering would be less the 2k supplied and mapped which is pretty good. Link to comment Share on other sites More sharing options...
SimonB Posted March 7, 2008 Share Posted March 7, 2008 Mark erm...I cannot remember his second name now. Mark Harrison is the guy at Owens. Link to comment Share on other sites More sharing options...
Wez Posted March 7, 2008 Share Posted March 7, 2008 So, just to clarify. If it is a built box then the standard Toyota Auto Box ECU will be OK to use but if it is a standard Toyota box, then it isn't? I think what he ment was that a stock box needs the shift retard to prolong its life, a built box can do without. Link to comment Share on other sites More sharing options...
CJ Posted March 7, 2008 Share Posted March 7, 2008 Mark Harrison is the guy at Owens. That's the fella. My memory is going - I blame it on the sun myself Link to comment Share on other sites More sharing options...
Wez Posted March 7, 2008 Share Posted March 7, 2008 Is mark sheady even a mapper, dunno where I got that name from then Link to comment Share on other sites More sharing options...
CJ Posted March 7, 2008 Share Posted March 7, 2008 I think what he ment was that a stock box needs the shift retard to prolong its life, a built box can do without. Ah right. Bloody complicated this lark eh? Link to comment Share on other sites More sharing options...
Andyhannah Posted March 7, 2008 Share Posted March 7, 2008 Mark Sheady maybe? For an auto I would recommend an AEM as well, the deal muffleman is offering would be less the 2k supplied and mapped which is pretty good. Isn't that about the average??? Link to comment Share on other sites More sharing options...
CJ Posted March 7, 2008 Share Posted March 7, 2008 Is mark sheady even a mapper, dunno where I got that name from then I think he maps Autronic ecu's Link to comment Share on other sites More sharing options...
Muffleman Posted March 7, 2008 Share Posted March 7, 2008 That's the fella. My memory is going - I blame it on the sun myself Yeah it's the sun - or is it ....... http://www.norrisonbrand.com/photos/uncategorized/2007/09/20/26_cr_port_corona_l_2.jpg Link to comment Share on other sites More sharing options...
SimonB Posted March 7, 2008 Share Posted March 7, 2008 Mark Sheady maybe? Mark Sheady is the guy from MA Developments - they are the Autronic specialists. Link to comment Share on other sites More sharing options...
Andyhannah Posted March 7, 2008 Share Posted March 7, 2008 Is mark sheady even a mapper, dunno where I got that name from then damn beaten to it lol Link to comment Share on other sites More sharing options...
Wez Posted March 7, 2008 Share Posted March 7, 2008 Isn't that about the average??? I have no idea matey, when I picked mine up many many moons ago it was all still very new so costs were much higher Link to comment Share on other sites More sharing options...
Ryan.G Posted March 7, 2008 Share Posted March 7, 2008 I'm sorry.I didn't realise that there was a difference due to the built box. I assumed as it was an auto box it would have been the same. So, just to clarify. If it is a built box then the standard Toyota Auto Box ECU will be OK to use but if it is a standard Toyota box, then it isn't? Ideally it would still be best to get the retard function working so that it pulls the timing on the shifts to drop the torque for both of the boxes but the built one will obviously be built to take alot of strain on the Sprag clutch so will last longer. Ryan Link to comment Share on other sites More sharing options...
Wez Posted March 7, 2008 Share Posted March 7, 2008 Ahh ok, so he his a mapper at least, thats ok then Link to comment Share on other sites More sharing options...
CJ Posted March 7, 2008 Share Posted March 7, 2008 Yeah it's the sun - or is it ....... http://www.norrisonbrand.com/photos/uncategorized/2007/09/20/26_cr_port_corona_l_2.jpg Mmm...Corona - my favourite Link to comment Share on other sites More sharing options...
CJ Posted March 7, 2008 Share Posted March 7, 2008 Ideally it would still be best to get the retard function working so that it pulls the timing on the shifts to drop the torque for both of the boxes but the built one will obviously be built to take alot of strain on the Sprag clutch so will last longer. Ryan I'm sorry but since the pics of the Corona bottles came up I have completely lost interest in ECU's Link to comment Share on other sites More sharing options...
Ryan.G Posted March 7, 2008 Share Posted March 7, 2008 (edited) Mark Harrison is the guy at Owens. He is very good also. Seen 2 of his Maps and they are spot on. Oxford always has the best mappers Mark harrison, Dave rowe, Fraser M Edited August 18, 2008 by Ryan.G (see edit history) Link to comment Share on other sites More sharing options...
JustGav Posted March 7, 2008 Share Posted March 7, 2008 Ideally it would still be best to get the retard function working so that it pulls the timing on the shifts to drop the torque for both of the boxes I've been thinking about this for a good while now (as you probably know). Out of interest does the Link have some sort of digital input on it that when pulled high or low would be able to get the ECU to pull timing somehow, perhaps using a form of artifical rev limit perhaps not sure? Link to comment Share on other sites More sharing options...
CJ Posted March 7, 2008 Share Posted March 7, 2008 He is very good also. Seen 2 of his Maps and they are spot on. Oxford always has the best mappers Mark harrison, Dave rowe, Fraser M All trained at the same place as me also Dave Rowe did work on my car too. A lovely guy and very knowledgeable. Link to comment Share on other sites More sharing options...
Ryan.G Posted March 7, 2008 Share Posted March 7, 2008 Dave Rowe did work on my car too. A lovely guy and very knowledgeable. Yh he did mention you ages ago and your orange beast. He is only 8 miles down the road from me and guess who he taught abit of mapping too Link to comment Share on other sites More sharing options...
CJ Posted March 7, 2008 Share Posted March 7, 2008 Yh he did mention you ages ago and your orange beast. He is only 8 miles down the road from me and guess who he taught abit of mapping too Well, if he taught you, then you must be good Link to comment Share on other sites More sharing options...
Muffleman Posted March 7, 2008 Share Posted March 7, 2008 Dave Rowe did work on my car too. A lovely guy and very knowledgeable. Dave Rowe and Fraser Mackellar - they really are the best. Link to comment Share on other sites More sharing options...
Ryan.G Posted March 7, 2008 Share Posted March 7, 2008 I've been thinking about this for a good while now (as you probably know). Out of interest does the Link have some sort of digital input on it that when pulled high or low would be able to get the ECU to pull timing somehow, perhaps using a form of artifical rev limit perhaps not sure? Yes it does Gav, you can set it to a falling or rising edge and you could set a auxilary output to ground when say 6800rpm is hit. but having the overdrive off will cause issue's as it changes earlier It could be done with a suprastick if they did a little hardware tweak for us Link to comment Share on other sites More sharing options...
Nodalmighty Posted March 7, 2008 Share Posted March 7, 2008 Yes it does Gav, you can set it to a falling or rising edge and you could set a auxilary output to ground when say 6800rpm is hit. but having the overdrive off will cause issue's as it changes earlier It could be done with a suprastick if they did a little hardware tweak for us Ryan I'm sure I sent you this link, forget SupraStick, go here : http://www.powertraincontrolsolutions.com/content-4.html Cost a bit more but look at the spec Lyndon. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now