and1c Posted March 1, 2008 Share Posted March 1, 2008 As above guys.... I need some to mount a 2JZ GTE to my engine stand and am struggling big time to get the correct items from any fastener suppliers (its the fine pitch that does it I think) Can anyone help me here please Alternatively, does anyone know the part numbers I need from Mr T please? Link to comment Share on other sites More sharing options...
H7ERO Posted March 1, 2008 Share Posted March 1, 2008 i got a a far too big box of toyota bolts ! i know the ones you mean with a 17mm head tell me what length you want can hav em, i guess you pretty far though so if you cover the postage theyre yours can post on monday cheers RP Link to comment Share on other sites More sharing options...
and1c Posted March 1, 2008 Author Share Posted March 1, 2008 i got a a far too big box of toyota bolts ! i know the ones you mean with a 17mm head tell me what length you want can hav em, i guess you pretty far though so if you cover the postage theyre yours can post on monday cheers RP Thanks mate Length I need is 70mm ideally but I can use spacers if the only ones you have are longer? Would be much appreciated if you have any of the right size (70mm+) and postage is on me of course Will pm you Link to comment Share on other sites More sharing options...
and1c Posted March 1, 2008 Author Share Posted March 1, 2008 Also, could anyone please clarify exactly what size and thread pitch the bellhousing bolts are as Ive not got any to measure against. I know that they are a 1.25 fine pitch thread but not 100% on the actual bolt size (M What?) Thanks.... Link to comment Share on other sites More sharing options...
Luka-P Posted September 1, 2008 Share Posted September 1, 2008 M12 buddy, I know its a while ago though Link to comment Share on other sites More sharing options...
SimonB Posted September 1, 2008 Share Posted September 1, 2008 M12 x 1.25. The actual gearbox mount bolts are no good - they aren't long enough for an engine stand. You need to get hold of some longer bolts from elsewhere. Link to comment Share on other sites More sharing options...
garethr Posted September 1, 2008 Share Posted September 1, 2008 http://www.namrick.co.uk/browse.asp?PCID=9 Link to comment Share on other sites More sharing options...
TRD DAN Posted September 1, 2008 Share Posted September 1, 2008 i bought some of these today you want m12x1.25x100 (bolt yzp) the four cost me 11.22 from ahc in camberley Link to comment Share on other sites More sharing options...
Luka-P Posted September 1, 2008 Share Posted September 1, 2008 70s or 80s should be ok too for the job! Link to comment Share on other sites More sharing options...
TRD DAN Posted September 2, 2008 Share Posted September 2, 2008 70s or 80s should be ok too for the job! these willl be better as mine were a bit long Link to comment Share on other sites More sharing options...
steve spedd Posted January 8, 2010 Share Posted January 8, 2010 Bump this thread, Im after the bolts the mate up the engine to the gearbox/bell housing on the W58. any ideas? thanks Link to comment Share on other sites More sharing options...
keron Posted January 8, 2010 Share Posted January 8, 2010 Bump this thread, Im after the bolts the mate up the engine to the gearbox/bell housing on the W58. any ideas? thanks ive got loads steve...give you some tomorrow... Link to comment Share on other sites More sharing options...
steve spedd Posted January 8, 2010 Share Posted January 8, 2010 thanks pal... i best bring some cash as no doubt you will have loads of bits i want :) Link to comment Share on other sites More sharing options...
Recommended Posts