probrox Posted February 29, 2008 Share Posted February 29, 2008 Looks like I need to replace my clutch as it's started slipping in all gears now. Can anyone tell me 1) Which clutch to go for, where from and rough cost, and 2) somewhere in the Ipswich or Colchester area to get it fitted (and price). Thanks Quote Link to comment Share on other sites More sharing options...
gaz1 Posted February 29, 2008 Share Posted February 29, 2008 Looks like I need to replace my clutch as it's started slipping in all gears now. Can anyone tell me 1) Which clutch to go for, where from and rough cost, and 2) somewhere in the Ipswich or Colchester area to get it fitted (and price). Thanks my lad took his to mr clutch in colchester, i think it was 250 fitted Quote Link to comment Share on other sites More sharing options...
probrox Posted February 29, 2008 Author Share Posted February 29, 2008 my lad took his to mr clutch in colchester, i think it was 250 fitted Can't find anything on Mr Clutch on the web. The Clutch Centre possibly? Quote Link to comment Share on other sites More sharing options...
gaz1 Posted February 29, 2008 Share Posted February 29, 2008 Can't find anything on Mr Clutch on the web. The Clutch Centre possibly? i just rang him and he is adamant it was mr clutch colchester, and it was 250 with the flywheel skimmed;) Quote Link to comment Share on other sites More sharing options...
gaz1 Posted February 29, 2008 Share Posted February 29, 2008 ahhh just looked it up it could be chelmsford as we were working at harwich at the time:search: Quote Link to comment Share on other sites More sharing options...
probrox Posted February 29, 2008 Author Share Posted February 29, 2008 ahhh just looked it up it could be chelmsford as we were working at harwich at the time:search: Thats fine, I'm at college in Chelmsford every Thursday. Do you know if that included associated bearings as well? And is the flywheel ok to be skimmed or should i renew? Quote Link to comment Share on other sites More sharing options...
gaz1 Posted February 29, 2008 Share Posted February 29, 2008 Thats fine, I'm at college in Chelmsford every Thursday. Do you know if that included associated bearings as well? And is the flywheel ok to be skimmed or should i renew? well to be honest they will probably tell you the flywheel will need replacing as there a bit quick fit like:d my lads is fine and its been on trackdays since;) Quote Link to comment Share on other sites More sharing options...
Dave F Posted March 3, 2008 Share Posted March 3, 2008 Just been quoted £384 by Mr Clutch in Rochester. Quote Link to comment Share on other sites More sharing options...
couv3z Posted March 3, 2008 Share Posted March 3, 2008 i just had mine done from nationwide clutch (yellow pages) 480 for a stock replacement they did it in one day! N/a 5speed manual they said its the worse one they have removed more fell out than was connected oops not like i tryed a burn out for the first time Quote Link to comment Share on other sites More sharing options...
probrox Posted March 3, 2008 Author Share Posted March 3, 2008 -I'm thinking the cheapest way to do this will be to get the clutch first and pay to have it fitted somewhere, does anyone know how much a stock clutch is? Also what bearings etc should i replace at the same time? Quote Link to comment Share on other sites More sharing options...
Missile Posted March 4, 2008 Share Posted March 4, 2008 Get in touch with kylestt. Very helpful chap... Quote Link to comment Share on other sites More sharing options...
couv3z Posted March 4, 2008 Share Posted March 4, 2008 They told me it was 5 hrs labour to change the clutch 250 labour, no idea how cheap a clutch is on its own, hope gives you a ball park figure if do find out (= Quote Link to comment Share on other sites More sharing options...
Konrad Posted March 4, 2008 Share Posted March 4, 2008 Normally Nick (Import Pimp) should be your best shot, if you can wait some time. Installing clutch and flywheel + gasket change on gearbox costed me around 200 pounds - it was perfect work of famous Mr. Wilson Clutch, flywheel, master and slave cylinder got to around 420 pounds? Quote Link to comment Share on other sites More sharing options...
Luigi_Gool Posted March 4, 2008 Share Posted March 4, 2008 Get in touch with kylestt. Very helpful chap... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.