Guest daz 6576 Posted February 27, 2008 Share Posted February 27, 2008 hi has anyone got some water lines they might sell to fit a hks t04r turbo with the bolts for the turbo also as a kit shall we say Link to comment Share on other sites More sharing options...
Jake Posted February 27, 2008 Share Posted February 27, 2008 The t04r doesn't take water lines, it's oil-cooled. Link to comment Share on other sites More sharing options...
Guest daz 6576 Posted February 27, 2008 Share Posted February 27, 2008 got a problem then cus i think this one is water cooled as well and the previous owner said its water cooled aswell as oil cooled Link to comment Share on other sites More sharing options...
tooquicktostop Posted February 27, 2008 Share Posted February 27, 2008 got a problem then cus i think this one is water cooled as well and the previous owner said its water cooled aswell as oil cooled When did I tell you it was water and oil cooled?? The lines were never used in my set up and I said I thought they were water cooling lines as this is what T04R.com says Are you fitting this yourself as you dont really seem to know much about Supra singles no offence but you could end up damaging your car and I would not want that Link to comment Share on other sites More sharing options...
Guest daz 6576 Posted February 27, 2008 Share Posted February 27, 2008 did you have to blank off the 2 holes then or did you leave them open Link to comment Share on other sites More sharing options...
tooquicktostop Posted February 27, 2008 Share Posted February 27, 2008 did you have to blank off the 2 holes then or did you leave them open As they were supplied to you daz, my car was set up without the cooling lines being used, not to say that fitting them would be a bad idea however, they were put there for a reason You would not have to blank it off I would have thought as it is an empty chamber without water/oil Link to comment Share on other sites More sharing options...
Guest daz 6576 Posted February 27, 2008 Share Posted February 27, 2008 cheers for that. im a bit confused to were the boost pipe goes for this turbo Link to comment Share on other sites More sharing options...
tooquicktostop Posted February 27, 2008 Share Posted February 27, 2008 What do you mean by boost pipe?? Link to comment Share on other sites More sharing options...
Guest daz 6576 Posted February 27, 2008 Share Posted February 27, 2008 the small pipe from the boost controller which goes to the turbo Link to comment Share on other sites More sharing options...
tooquicktostop Posted February 27, 2008 Share Posted February 27, 2008 the small pipe from the boost controller which goes to the turbo Daz, I have very little tech knowledge, but you control the boost via a boost solenoid and wastegate and this is were a boost pipe would be connected if I remember rightly, are you running a stock ECU, have you uprated injectors please get some proper advise before fitting this stuff or you will be in a world of trouble Link to comment Share on other sites More sharing options...
RobSheffield Posted February 27, 2008 Share Posted February 27, 2008 Oh my god Link to comment Share on other sites More sharing options...
kieren1234 Posted February 27, 2008 Share Posted February 27, 2008 Oh my god Thats what i thought. You really do need to do some research before doing this, its not just a case of bolting it all on and then its all setup. The boost pipe usualy plumbs into the compressor housing of the turbo via a barbed 'nipple'......... Link to comment Share on other sites More sharing options...
Recommended Posts