gavin.starr Posted February 23, 2008 Share Posted February 23, 2008 do i need any special tools to remove the origional brake disks as i now have some 3g ones to put on. or is it just as usual undo the bolts on the back of the caliper swing the caliper out of the way and tap the brake disk away from the hub or is there something else holding them on its just for peace of mind really so i dont start doing them and run into technicalities cheers in advance gav Quote Link to comment Share on other sites More sharing options...
Homer Posted February 23, 2008 Share Posted February 23, 2008 Presumably it's the front? It's more or less as you stated, just a couple of bolts at the back of the caliper, then it should just lift off. The rears are a little different as you have toi wind the handbrake shoes in before taking the disc off Quote Link to comment Share on other sites More sharing options...
Al Massey Posted February 23, 2008 Share Posted February 23, 2008 how do you wind the handbrake shoes in? Quote Link to comment Share on other sites More sharing options...
Terminator Posted February 23, 2008 Share Posted February 23, 2008 With the adjuster Quote Link to comment Share on other sites More sharing options...
Guest Garfy Posted February 24, 2008 Share Posted February 24, 2008 there is a little rubber bung on the disc, rotate the disc till it is at the bottom (If I remember correctly) and then use a straight screw driver to turn the adjuster Quote Link to comment Share on other sites More sharing options...
gavin.starr Posted February 24, 2008 Author Share Posted February 24, 2008 yea im removing the fronts. cheers fellas gav Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.