Sparky Posted February 21, 2008 Share Posted February 21, 2008 Hi all, After reading a few posts about a slight knock maybe caused from the flywheel that ive been experiencing, ive decided when i get the gearbox seals done to have the clutch and flywheel changed. Do you think this is a good idea and if so what parts should i replace? Cheers Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted February 21, 2008 Share Posted February 21, 2008 Can't really comment on exactly what you need to replace, are you doing to do it yourself? Chris Wilson did mine, and while he was there, he did the flywheel, seals, and the crank damper pulley thing as it wasn't in great condition. Quote Link to comment Share on other sites More sharing options...
Sparky Posted February 21, 2008 Author Share Posted February 21, 2008 I was just wondering which bits usually get replaced thats all. Ive got a decent company in weymouth sorting it out but i want it done asap with minimal time delay so i wanted to get all the bits all in one go and just replace all of it! Quote Link to comment Share on other sites More sharing options...
bignum Posted February 21, 2008 Share Posted February 21, 2008 Clutch release bearing, spigot bearing, think youve mentioned everything else. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.