jevansio Posted February 16, 2008 Share Posted February 16, 2008 Well the car is finally running to it's true potential, in summary it got over 600 bhp: http://www.imotors.co.uk/temp/jay/SupraDyno/16-02-2008 630 @ 1.4 BAR Small.jpg In detail, met Ryan this morning, it was bright & dry so we got straight into getting some road mapping done. We spent about an hour on the road with Ryan doing his stuff, the car felt great, was even able to light up 295 R888's in 2nd gear. Ryan wasn't completly happy with the boost control & suggested we do what he had done on Wez car & use an AEM solenoid & get the ECU to control boost closed loop. The results speak for themselves, it could pretty much hold any boost we wanted exactly (I mean if you looked at the boot curve it was straight as an arrow, never dropped off top end or anything). Ryan said now it should pull 1.4 BAR no matter what the conditions are. We got down to Motoscope, I was first on, quite a few of my MR2 buddies turned up to view the proceedings. Everything went exactly to plan . We had to dyno the car in 5th which meant the dyno could only go to 6500 rpm before we maxed out it's speed. Going to Andy H's dyno day next Saturday so should hopefully get a full 7200 rpm pull there After I had to shoot upto Revolution at Newcastle to get my arches rolled. Big thanks to the guys there for staying late & doing the job for me (esp on a Saturday). I can now go on the Pistonheads run out tomorrow without fear of shredding my new tyres. Big thanks to everyone today, Richard of MS, Michel, Ryan & all the MR2 guys, big thanks to Richard for the free Motoscope coat too I'm sure there was something else I had to say but can't remember at the mo, no doubt Ryan will remember. Link to comment Share on other sites More sharing options...
tooquicktostop Posted February 16, 2008 Share Posted February 16, 2008 Very nice figures, very happy to see it all went to plan, great news chap Link to comment Share on other sites More sharing options...
jevansio Posted February 16, 2008 Author Share Posted February 16, 2008 Very nice figures, very happy to see it all went to plan, great news chap Cheers Dean, much appreciated Link to comment Share on other sites More sharing options...
JamieP Posted February 16, 2008 Share Posted February 16, 2008 Nice one Jay, bet thats flying now:) Link to comment Share on other sites More sharing options...
jevansio Posted February 16, 2008 Author Share Posted February 16, 2008 Nice one Jay, bet thats flying now:) Cheers Jamie, it sure is , It doesn't half squirm about when nailing it in 2nd / 3rd, front end goes real light & snakes about, does this point to a suspension problem (worn bearning / bush?) Also pics & vids my mate took coming soon Link to comment Share on other sites More sharing options...
Pig Posted February 16, 2008 Share Posted February 16, 2008 Congrats mate. How were the losses calculated?] Edit: i have the same prob with the front snaking, would love to know the answer Link to comment Share on other sites More sharing options...
tooquicktostop Posted February 16, 2008 Share Posted February 16, 2008 Cheers Jamie, it sure is , It doesn't half squirm about when nailing it in 2nd / 3rd, front end goes real light & snakes about, does this point to a suspension problem (worn bearning / bush?) Also pics & vids my mate took coming soon It points out that you have over 600 BHP I think Jay Link to comment Share on other sites More sharing options...
Wez Posted February 16, 2008 Share Posted February 16, 2008 Nice result The AEM boost control is very nice when setup properly isnt it. Link to comment Share on other sites More sharing options...
Andyhannah Posted February 16, 2008 Share Posted February 16, 2008 Nice figures jay, what dyno was that on?? Andy Link to comment Share on other sites More sharing options...
jevansio Posted February 16, 2008 Author Share Posted February 16, 2008 Congrats mate. How were the losses calculated?] Edit: i have the same prob with the front snaking, would love to know the answer Cheers Jon, it's never been a problem for me before, probably because the F1's would just spin, but the 888's obviously grip like mad. Maybe CW can answer this, he'll probably tell me to ditch the 19's It points out that you have over 600 BHP I think Jay Lol, makes sense Dean Nice result The AEM boost control is very nice when setup properly isnt it. Cheers, it certainly is Wez, I was a bit aprehensive at first, thinking my DSBC was fine, how wrong I was Nice figures jay, what dyno was that on?? Andy Cheers Andy, it's a Dastek dyno I think, Motoscopes at Northallerton (750 bhp per axle). Looking forward to Saturday at yours now, will I be able to run to 7200 in 5th on yours? Link to comment Share on other sites More sharing options...
Pig Posted February 16, 2008 Share Posted February 16, 2008 Cheers Jon, it's never been a problem for me before, probably because the F1's would just spin, but the 888's obviously grip like mad. Maybe CW can answer this, he'll probably tell me to ditch the 19's I run 17's and use TOYO's (get lots of grip). Chris Wilson.......we need you please Link to comment Share on other sites More sharing options...
kylestt Posted February 16, 2008 Share Posted February 16, 2008 Very Nice Jay!!!! Link to comment Share on other sites More sharing options...
jevansio Posted February 16, 2008 Author Share Posted February 16, 2008 Very Nice Jay!!!! Cheers Kyle , they way it goes at the moment, that 3.4l idea is fast fading, Link to comment Share on other sites More sharing options...
bignum Posted February 16, 2008 Share Posted February 16, 2008 Great results!! Link to comment Share on other sites More sharing options...
kylestt Posted February 16, 2008 Share Posted February 16, 2008 Cheers Kyle , they way it goes at the moment, that 3.4l idea is fast fading, it will save you lots of money if its fading Link to comment Share on other sites More sharing options...
Tones Posted February 16, 2008 Share Posted February 16, 2008 nice one, few vids perhaps? Link to comment Share on other sites More sharing options...
jevansio Posted February 16, 2008 Author Share Posted February 16, 2008 Cheers guys, waiting for my mate to download the vids from his phone, shouldn't be long Link to comment Share on other sites More sharing options...
RobSheffield Posted February 16, 2008 Share Posted February 16, 2008 Looking good mate Link to comment Share on other sites More sharing options...
Mike B Posted February 16, 2008 Share Posted February 16, 2008 Good stuff matey, You notice a difference with '82 housing? you booked for marham? Link to comment Share on other sites More sharing options...
Jazzy Posted February 16, 2008 Share Posted February 16, 2008 Yummy those are some nice figures Link to comment Share on other sites More sharing options...
jevansio Posted February 16, 2008 Author Share Posted February 16, 2008 Looking good mate Cheers Rob Good stuff matey, You notice a difference with '82 housing? you booked for marham? I'd say so, it pulls even stronger after 6k now, it really doesn't let up. I was looking at the thread last night, was so tempted, trouble is I've already got 2 weekends away around that time, will have to do some serious arse kissing with my lass if I were to come. Link to comment Share on other sites More sharing options...
gaz1 Posted February 16, 2008 Share Posted February 16, 2008 nice one mate, glad to hear it went well, mine next week:D now get ya name down for marham;) Link to comment Share on other sites More sharing options...
jevansio Posted February 16, 2008 Author Share Posted February 16, 2008 nice one mate, glad to hear it went well, mine next week:D now get ya name down for marham;) Cheers Gaz, boy is there some peer group pressure on here tonight Link to comment Share on other sites More sharing options...
AshBhp Posted February 16, 2008 Share Posted February 16, 2008 Nice figures there Marham, would be an unforgettable experience. Link to comment Share on other sites More sharing options...
jevansio Posted February 16, 2008 Author Share Posted February 16, 2008 Nice figures there Marham, would be an unforgettable experience. Cheers Ash Here's the only video my mate took, he did a better one but deleted it by mistake http://smg.photobucket.com/albums/v300/UK_MRV6/?action=view¤t=MOV000691.flv Those 888's don't half make some noise! Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now