Fargo Posted February 6, 2008 Share Posted February 6, 2008 Need some help guys, im looking at adding some of the snazzy braided hose and connectorhttp://www.netcomuk.co.uk/~lfracing/103.jpg (from speedflow http://www.netcomuk.co.uk/~lfracing/home.htm) Im starting with an oil catch can but cant get started with specifying how/what i need in regards to connecting to the valve covers. Would i need to get diffferent connectors fitted to the valve covers or what snazzy connector would marry up to this.... help.. ta all Link to comment Share on other sites More sharing options...
RobSheffield Posted February 6, 2008 Share Posted February 6, 2008 Yes you would need new fittings welding on..... .....and a good reason for going to all that trouble! Link to comment Share on other sites More sharing options...
supradibbs Posted February 6, 2008 Share Posted February 6, 2008 You cant just weald them on you need to open the hole up to the correct size which means removing the baffles from inside the cam cover I have made a few of these in the past http://www.mkivsupra.net/vbb/showthread.php?t=136801 Link to comment Share on other sites More sharing options...
Fargo Posted February 6, 2008 Author Share Posted February 6, 2008 i see Mr Dibbs, so the threaded part on the cam cover that the blue T piece scews to, whats that part all about, ie is it an off the shelf threaded lug or what ?? Link to comment Share on other sites More sharing options...
supradibbs Posted February 7, 2008 Share Posted February 7, 2008 yeah can buy them yes but there come with flats like a bolt i turn them on so there round then there wealed on a the weald is built up and cut and smoothed back to form a nice smooth seamless join Link to comment Share on other sites More sharing options...
Fargo Posted February 13, 2008 Author Share Posted February 13, 2008 ahh ic Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now