cheekymonkey Posted February 5, 2008 Share Posted February 5, 2008 I've not seen a line lock install in the flesh yet but I plan to install mine as soon as we get some more nice weather I am ditching the ugly switch provided in my Hurst kit and going with a stonking big red button I got from Maplins My only question is where to put it? I am thinking in the centre console, near to the gear stick so it will be operated with my left hand like this: - Apply brakes - Clutch down, first gear - Hold down button and release brake pedal - Get revs up and clutch biting - Release the button as soon as I get a green light Or do you guys think it will be better to have the switch operated by my right hand so I can select first gear *after* the brakes are locked? Once the button is released do the brakes release instantly? Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted February 5, 2008 Share Posted February 5, 2008 I think you should put it on Ebay before you axle tramp the thing to destruction Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted February 5, 2008 Author Share Posted February 5, 2008 What the whole car? Quote Link to comment Share on other sites More sharing options...
Chris Wilson Posted February 5, 2008 Share Posted February 5, 2008 That's not what I meant Quote Link to comment Share on other sites More sharing options...
paul mac Posted February 5, 2008 Share Posted February 5, 2008 I think you should put it on Ebay before you axle tramp the thing to destruction subtle as allways Chris Quote Link to comment Share on other sites More sharing options...
Gaz Walker Posted February 5, 2008 Share Posted February 5, 2008 We have our button in the centre glovebox, behind the gearstick on a bit of wire 40-50cm long so it can be held in the hand (easiest). Gaz. Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted February 5, 2008 Author Share Posted February 5, 2008 We have our button in the centre glovebox, behind the gearstick on a bit of wire 40-50cm long so it can be held in the hand (easiest). Hmmm. I hadn't thought of a hand-held switch. Not a bad idea really. I'm now thinking of a 3.5mm plug and socket so I can detach the control completely for safety when I don't need it. My original plan was to be able to completely isolate the line lock with a key-operated switch in the centre console, which I may still do. Hmmm what about a mouth operated switch to enable true hands free operation Quote Link to comment Share on other sites More sharing options...
Nic Posted February 5, 2008 Share Posted February 5, 2008 GReddy do a steering wheel mounted button which could possibly be adapted to work. http://www.trust-power.com/03electric/img/remo_s.jpg Quote Link to comment Share on other sites More sharing options...
Gaz Walker Posted February 5, 2008 Share Posted February 5, 2008 Hmmm what about a mouth operated switch to enable true hands free operation Maybe a touch too far Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted April 24, 2008 Author Share Posted April 24, 2008 OK... now that the kit has been fitted and I've test wired it in, I now know what I need to use to activate it... Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted April 24, 2008 Share Posted April 24, 2008 Hope you have a decent clutch. Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted April 24, 2008 Author Share Posted April 24, 2008 *whoosh* ?? Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted April 24, 2008 Share Posted April 24, 2008 So you're using this to actually launch the car then? Rather than just for burnouts? Quote Link to comment Share on other sites More sharing options...
Mr. Fish Posted April 24, 2008 Share Posted April 24, 2008 So you're using this to actually launch the car then? Rather than just for burnouts? i thought having them for burnouts was the whole point of them, as you can just use the handbrake to launch the car. Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted April 24, 2008 Author Share Posted April 24, 2008 So you're using this to actually launch the car then? Rather than just for burnouts? Not sure TBH - maybe not to "launch" the car (stock clutch!!) but perhaps to prevent rolling forward when I get the biting point. Like a handbrake that releases really quickly. That said, I don't pretend to actually know what I'm talking about, so if drag pros want to tell me how it's done then great Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted April 24, 2008 Share Posted April 24, 2008 I think to get better launches something like launch control/2 step limiter would be a lot more effective. The way I understand it line lock is good for big controllable burnouts as you have full throttle control without left foot braking. Launching with this wouldn't be any better than using the handbrake IMO. Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted April 24, 2008 Author Share Posted April 24, 2008 I think to get better launches something like launch control/2 step limiter would be a lot more effective. The way I understand it line lock is good for big controllable burnouts as you have full throttle control without left foot braking. Yep, I'm have RLTC going on next week with LC, Admittedly the Line Lock was an impulse buy off here (never browse Parts For Sale after 2am when drunk ) but it's very effective for burnouts, which is in itself an expensive problem Quote Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted April 24, 2008 Share Posted April 24, 2008 *whoosh* ?? If your going to do burnouts or hard launches, then your std clutch won't last very long. Quote Link to comment Share on other sites More sharing options...
Gaz6002 Posted April 24, 2008 Share Posted April 24, 2008 If you use it in conjunction with RLTC LC then you will certainly put on quite a show at the 'Pod Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted April 24, 2008 Author Share Posted April 24, 2008 If your going to do burnouts or hard launches, then your std clutch won't last very long. Yep - hence the coin slot! That being the joke and all.. Sorry, I know, I'm crap... Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted April 24, 2008 Author Share Posted April 24, 2008 If you use it in conjunction with RLTC LC then you will certainly put on quite a show at the 'Pod The problem I have is then people will be expecting something better than the 12.5 seconds I'll be running Quote Link to comment Share on other sites More sharing options...
GazB Posted April 24, 2008 Share Posted April 24, 2008 Be aware that you should have a switch that turn your line lock on (Rear wheels), then a seperate switch to hold the brakes (i've got a switch on my gear stick), which is then released to allow you to move forward (unlocks rear breaks), you will then need to switch your rear brakes back on before moving off. Otherwise when you press your break pedal there willl be no rear breaks Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted April 24, 2008 Author Share Posted April 24, 2008 Be aware that you should have a switch that turn your line lock on (Rear wheels), then a seperate switch to hold the brakes (i've got a switch on my gear stick), which is then released to allow you to move forward (unlocks rear breaks), you will then need to switch your rear brakes back on before moving off. Otherwise when you press your break pedal there willl be no rear breaks Ermm.. I don't quite follow! My line lock is tapped in to the front brake line - it's not touching the rear brakes at all. When I hold the button, the solenoid isolates the front brakes, and when I release the button everything goes back to normal. Sounds like you're talking about isolating the rear brakes, not sure how useful that would be unless you're on a front wheel drive car Quote Link to comment Share on other sites More sharing options...
GazB Posted April 24, 2008 Share Posted April 24, 2008 So how does it isolate the front brakes? IMO you want to disable the rear brakes, when applying the line lock it disables the rear system allowing front brakes to lock the front wheels only. That would be why i have a red button that lights up tells me the line lock solenoid is active meaning rear brakes are disabled the switch on my gear stick then hold the system under pressure (front brakes only) when pressure is applied by the foot pedal, by releasing this button the pressure is released allowing the front brake to disable and the car move. Tell me if i'm wrong and please explain how it works on fronts as i would be very interested to know Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted April 24, 2008 Author Share Posted April 24, 2008 Sounds like you'd need two solenoids for that to work, and you'd probably get awfully confused The way a line lock kit works is it's tapped in to the front brakes, and... 1. Press and hold brake pedal - both rears and fronts are pressurised 2. Hold down line lock button - front brake system isolated whilst under pressure (this holds the fronts ON) 3. Release brake pedal - pressure is released from the rear brakes but fronts remain on because of the solenoid = burnouty goodness! As soon as you release the button the pressure in the front brakes is released and you can move. EDIT: Are you sure your first red button isn't just a master "ARM" switch/warning to make sure you don't activate the line lock inadvertantly? That's probably what I am going to do, else if the line lock it activated accidentally during normal driving then I'd have no front brakes... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.