AndyT Posted September 21, 2008 Share Posted September 21, 2008 A lot of good work. Quote Link to comment Share on other sites More sharing options...
Homer Posted October 11, 2008 Author Share Posted October 11, 2008 Now that the gearbox issue is fixed and the missing temp sesnor is sourced (thanks Little num!), the gear oil is now in and the coolant topped up. Also bought a new high powered battery. So, booked it in for an MOT in the week... Sadly that was tempting fate as when I came to bleed the PAS system this evening, one of the high pressure lines split spraying oil all over the engine bay, driveway and myself. £40 worth of ATF takes a lot of mopping up! So, MOT now cancelled and now looking for a new PAS line (£96 from Toyota!!). Seems I missed a deep cut in the PAS line, it was bought from a scrap yard and I guess someone had cut into it at some point while the engine was removed from the car. On the plus side, the engine was running lovely before the line went. Quote Link to comment Share on other sites More sharing options...
MrRalphMan Posted October 11, 2008 Share Posted October 11, 2008 Getting close now then Homer... What else is there to do once MOT'd? Quote Link to comment Share on other sites More sharing options...
JamieP Posted October 11, 2008 Share Posted October 11, 2008 Nearly there, gonna try and have it done for suprapod mate? Quote Link to comment Share on other sites More sharing options...
Homer Posted October 11, 2008 Author Share Posted October 11, 2008 Getting close now then Homer... What else is there to do once MOT'd? Yep, it's very close, but Suprapod is now ruled out, not enough time left as I only have weekends to work on it The only way is to get a PAS line tomorrow, but don't fancy my chances! It needs a fog light adding and the brake system needs bleeding again as there's not much pedal pressure. One of the ABS sensors is faulty so need to replace that, but can live without ABS in the mean time. Oh and a set of wheels! Quote Link to comment Share on other sites More sharing options...
Homer Posted October 11, 2008 Author Share Posted October 11, 2008 Nearly there, gonna try and have it done for suprapod mate? As above J, little to no chance really. Was a long shot really, but with the gearbox issue and having no spare time it was never really going to happy. Still gutted as it would have been nice to take the car there. Quote Link to comment Share on other sites More sharing options...
Steve Sherwood Posted October 11, 2008 Share Posted October 11, 2008 Hope it all goes well I know how hard it can be rebuilding a Supra Quote Link to comment Share on other sites More sharing options...
garethr Posted October 11, 2008 Share Posted October 11, 2008 ...now looking for a new PAS line......Take the old one to a hydraulic pipe specialist like Pirtek. Quote Link to comment Share on other sites More sharing options...
tDR Posted October 11, 2008 Share Posted October 11, 2008 Take the old one to a hydraulic pipe specialist like Pirtek. Yep, exactly what I did with my mk3 Quote Link to comment Share on other sites More sharing options...
Homer Posted October 25, 2008 Author Share Posted October 25, 2008 Well thats it, the car is more or less finished The electric windows now work, I had missed part of the wiring loom in the door which still had remnants of the clifford alarm on it, simple rewire needed. Also fitted the front number plate (Thanks Juanchan for sending the plate holder for free ) Now it's just a case of some simple items for the MOT: - Fog light mod - Reinstall the cat I lent to SBDJ - Get small hole on the exhaust welded - Bleed PAS system - Bleed ABS and brake system Can't do most of those until the cat is back as it's too noisy starting the car with no exhaust. Quote Link to comment Share on other sites More sharing options...
SteveR Posted October 25, 2008 Share Posted October 25, 2008 Convienient that it wasn't ready for llandow and the Pod. scared of something were we mate Glad it's nearly ready. Quote Link to comment Share on other sites More sharing options...
Swampy442 Posted October 25, 2008 Share Posted October 25, 2008 Nicely done mate Quote Link to comment Share on other sites More sharing options...
Homer Posted November 29, 2008 Author Share Posted November 29, 2008 Usual story, no time to work on the car, but have been getting little jobs done here and there. Picked up a complete spare drivers door today (thanks fire148 for the bargian!), the stickers won't come off the current one so it's cheaper to get a new door rather than paint them. It's now running almost fine, and some proof it actually works Can't do much more than this as there's no MOT, tax, etc wg6aBjj4c6k Just the following to do now: - Figure out why there's no heat getting to the cabin, engine is getting too hot. Probably an air lock... - Fix hole in exhaust (can be heard in the video) - Repair broken ABS wire - Fog light mod Quote Link to comment Share on other sites More sharing options...
Wez Posted November 29, 2008 Share Posted November 29, 2008 Well done matey Quote Link to comment Share on other sites More sharing options...
JamieP Posted November 29, 2008 Share Posted November 29, 2008 Thats looking good:) Quote Link to comment Share on other sites More sharing options...
Steve Posted November 29, 2008 Share Posted November 29, 2008 Nearly done....... for now Quote Link to comment Share on other sites More sharing options...
tDR Posted November 29, 2008 Share Posted November 29, 2008 Not much left to go... good to see it moving! Quote Link to comment Share on other sites More sharing options...
Jazzy Posted November 29, 2008 Share Posted November 29, 2008 Must be nice looking at it thinking 'I've done that' Quote Link to comment Share on other sites More sharing options...
jazz1 Posted November 29, 2008 Share Posted November 29, 2008 thats balls, well done mate looks good Quote Link to comment Share on other sites More sharing options...
Homer Posted November 29, 2008 Author Share Posted November 29, 2008 Must be nice looking at it thinking 'I've done that' Thanks for the comments folks, and Jazzy, yep, it's so nice to be able to drive the car seeing as how it started out. Really looking forward to doing the final few bits for the MOT but will need some hands on help for that, yet again Nearly done....... for now For now, yes I'd bought a 454 big block Chevy, but it turned out to be a dud so didn't go through with it in the end. Yesterday I bought a built 460 ford motor as it was a last minute sale and bargain price (£350), but am having serious 2nd thoughts. It's an incredibly torquey motor but the weight is high.. seriously high.. The LS1 would be ideal but the purchase price and conversion is so expensive it's not going to happen anytime soon, hence looking at less ideal motors for now. Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted November 30, 2008 Share Posted November 30, 2008 I'd bought a 454 big block Chevy, but it turned out to be a dud so didn't go through with it in the end. Yesterday I bought a built 460 ford motor as it was a last minute sale and bargain price (£350), but am having serious 2nd thoughts. It's an incredibly torquey motor but the weight is high.. seriously high.. The LS1 would be ideal but the purchase price and conversion is so expensive it's not going to happen anytime soon, hence looking at less ideal motors for now. Just out of interest, have you considered one of the Jaguar A-J series V8 engines? Fairly lightweight and they're available for very little at the moment. http://en.wikipedia.org/wiki/Jaguar_AJ-V8_engine Quote Link to comment Share on other sites More sharing options...
Homer Posted December 1, 2008 Author Share Posted December 1, 2008 Just out of interest, have you considered one of the Jaguar A-J series V8 engines? Fairly lightweight and they're available for very little at the moment. http://en.wikipedia.org/wiki/Jaguar_AJ-V8_engine Thanks for the thought. Though they are cheap to buy I want something which has significant long term potential for modification and at an acceptable cost, hence looking at the sb and bb US engines. Parts are incredibily cheap and available off the shelf and most engines can reach 2JZ single power figures (or more) for a fraction of the cost. Quote Link to comment Share on other sites More sharing options...
garethr Posted December 1, 2008 Share Posted December 1, 2008 From what I remember of researching US V8s, I don't think I'd go for a big block. They are big (), incredibly heavy, and expensive to modify. IIRC, the small block Ford (can't remember if Windsors or Clevelands are the ones to go for) is smaller and lighter, but the parts for a small block Chevy are easier to find and cheaper. Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted December 1, 2008 Share Posted December 1, 2008 From what I remember of researching US V8s, I don't think I'd go for a big block. They are big (), incredibly heavy, and expensive to modify. IIRC, the small block Ford (can't remember if Windsors or Clevelands are the ones to go for) is smaller and lighter, but the parts for a small block Chevy are easier to find and cheaper. The Chevy LS1 is probably the best as a transplant due to its weight (Approx 40kg lighter than a 2JZ apparently), although the parts look alot more expensive than the others (Certainly than the Ford lumps) Quote Link to comment Share on other sites More sharing options...
j_jza80 Posted December 1, 2008 Share Posted December 1, 2008 Thanks for the thought. Though they are cheap to buy I want something which has significant long term potential for modification and at an acceptable cost, hence looking at the sb and bb US engines. Parts are incredibily cheap and available off the shelf and most engines can reach 2JZ single power figures (or more) for a fraction of the cost. There's a fair amount of info on tuning the Jaguar lumps on the 'net (Some NA race engines seem to produce in excess of 700hp!) Like you said though, when you factor in the costs of parts for the American engines there is no argument. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.