supra steveo Posted June 15, 2008 Author Share Posted June 15, 2008 Are u sure? Well if thats what u want then i will sort it first thing monday Link to comment Share on other sites More sharing options...
Jamesy W Posted June 15, 2008 Share Posted June 15, 2008 Are u sure? Well if thats what u want then i will sort it first thing monday Yeah, cheers. Only takes a glimpse at the gear stick to tell you what gear you're in Link to comment Share on other sites More sharing options...
G-NEMIE Posted June 15, 2008 Share Posted June 15, 2008 Please Send My Dials As Is i will decide thank you Jamie Link to comment Share on other sites More sharing options...
pedrostar Posted June 16, 2008 Share Posted June 16, 2008 steve are the black ones mine in the pic? if not any chance of getting some piccies before you send them back? Link to comment Share on other sites More sharing options...
ward1955 Posted June 17, 2008 Share Posted June 17, 2008 Steve, send mine as they are as well ! Link to comment Share on other sites More sharing options...
supra_aero Posted June 17, 2008 Share Posted June 17, 2008 I will wait for an ETA on sending them back and getting them back to you Steve before I decide. Link to comment Share on other sites More sharing options...
THE DON Posted June 17, 2008 Share Posted June 17, 2008 when can i expect mine stevie boy?? Link to comment Share on other sites More sharing options...
T2 MSW Posted June 17, 2008 Share Posted June 17, 2008 Why have they put that stupid patent pending bit at the bottom too, makes them look stupid. Link to comment Share on other sites More sharing options...
mawby Posted June 18, 2008 Share Posted June 18, 2008 There is a good chance that wont be visible once installed. Link to comment Share on other sites More sharing options...
pedrostar Posted June 18, 2008 Share Posted June 18, 2008 anyone heard from steve recently? just wondering what the latest is on this... Link to comment Share on other sites More sharing options...
Jamesy W Posted June 18, 2008 Share Posted June 18, 2008 Mine came today, they look mint. Cheers Steve Link to comment Share on other sites More sharing options...
Bryan_Jones Posted June 18, 2008 Share Posted June 18, 2008 Now that i have the new dials I went to fit them and i can't get the dials on I'm really hoping that patent pending text isn't visable. Looks like it might be.......... See the below image: The one side of the needles catch on the dials. I really don't want to remove the dials as this can give you a serious headache afterwards. Anyone got any ideas? Link to comment Share on other sites More sharing options...
mawby Posted June 18, 2008 Share Posted June 18, 2008 I would guess you need to put the other end of the needle through the dail and then slip the dial under the centre part of the needle to allow the other shorter end to fit through the dial. Link to comment Share on other sites More sharing options...
Bryan_Jones Posted June 18, 2008 Share Posted June 18, 2008 That's the problem. I've just fitted it over like that to show what won't go through the hole. I've been sliding the long end through first, but the hole isn't big enough to fit the centre of the dial and the little bit I've circled through the hole. :( Link to comment Share on other sites More sharing options...
Bryan_Jones Posted June 18, 2008 Share Posted June 18, 2008 I'm thinking about maybe trimming the short end of the needle. I just hope it doesn't mess up the balance of the needle..... Can't cut the dials, and don't want to remove the needles. I don't see what choice I have. Anyone managed to fit a set of these dials yet? Link to comment Share on other sites More sharing options...
Bryan_Jones Posted June 18, 2008 Share Posted June 18, 2008 OK..........I've managed to get them on. I was nervous about bending the dials, but if you tuck the hole in the centre of the dial under the black centre part of the needle it will just about go on. Hope this makes sence. I'll post some photos shortly. Link to comment Share on other sites More sharing options...
mawby Posted June 18, 2008 Share Posted June 18, 2008 but if you tuck the hole in the centre of the dial under the black centre part of the needle it will just about go on Makes perfect sense to me... ...then slip the dial under the centre part of the needle to allow the other shorter end to fit through the dial. Link to comment Share on other sites More sharing options...
G-NEMIE Posted June 18, 2008 Share Posted June 18, 2008 Dials Have Arrived this morning Thank You Steve More than happy with them they will do fine regards jamie Link to comment Share on other sites More sharing options...
Bryan_Jones Posted June 18, 2008 Share Posted June 18, 2008 Oh, and good news. You can't see the patent pending text Link to comment Share on other sites More sharing options...
hoff Posted June 19, 2008 Share Posted June 19, 2008 Totally trust Jamis review of the dials so you can post mine too please steve. Thanks mate:) Link to comment Share on other sites More sharing options...
G-NEMIE Posted June 19, 2008 Share Posted June 19, 2008 Totally trust Jamis review of the dials so you can post mine too please steve. Thanks mate:) Adam, the only thing missing is the letters L 2 D N R P from above the little holes that show the lights through if you remember my old car i used manual white dials and just had the colours showing through the holes. so im happy as it is more like the old dials and less cluttered with lettering they glow well (but not fitted yet as my car is still with Chris Wilson) the controller is quite bulky but once set to your required brightnes / colour could be hidden from veiw jamie Link to comment Share on other sites More sharing options...
hoff Posted June 20, 2008 Share Posted June 20, 2008 You wont mind fitting mine then Jamie:d Has Chris sorted the little problem now then? Link to comment Share on other sites More sharing options...
Bryan_Jones Posted June 20, 2008 Share Posted June 20, 2008 Got my dials fitted yesterday. Look great. The only problem for me is that as I have the reverse El-glow I can't see my needles very clearly at night. I might have a look to see if putting some clear bulbs in the back will light up the needles. Link to comment Share on other sites More sharing options...
G-NEMIE Posted June 20, 2008 Share Posted June 20, 2008 You wont mind fitting mine then Jamie:d Has Chris sorted the little problem now then?[/QUOTE] :d:d:d:d Link to comment Share on other sites More sharing options...
hoff Posted June 20, 2008 Share Posted June 20, 2008 You wont mind fitting mine then Jamie:d Has Chris sorted the little problem now then?[/QUOTE] :d:d:d:d pm'd Link to comment Share on other sites More sharing options...
Recommended Posts