absz Posted January 14, 2008 Share Posted January 14, 2008 Right just checking on my jumper settings on the emu as i have the unit out for relocation. JP15 is set to 1-2 JP16 is set to 1-2 i have set the jumpers as per the pin numbers stamped on the circuit board.BUT on the insulation manual the pin numbers for the two jumpers are shown different.ie number 1 on the board is actual number 3 on the manual. which is correct ? hope that makes sense:blink: Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted January 14, 2008 Share Posted January 14, 2008 I would go with the ones on the board, as there where some minor board changes on the later production runs, and i doubt they changed the manual. Link to comment Share on other sites More sharing options...
absz Posted January 14, 2008 Author Share Posted January 14, 2008 cool, thanks:) Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted January 14, 2008 Share Posted January 14, 2008 I think 16 needs to be set to open as its the V-tec or Karmen input. Link to comment Share on other sites More sharing options...
absz Posted January 14, 2008 Author Share Posted January 14, 2008 i did have it set to open, but just doing some searching on the forum and another member had it set at 1-2 ( maybe his was a vtec ) http://www.mkivsupra.net/vbb/showthread.php?t=72773&highlight=jp16 Link to comment Share on other sites More sharing options...
Tricky-Ricky Posted January 15, 2008 Share Posted January 15, 2008 Probably won't make any difference which way its set as the feature is not used on the Supra, can't remember what mine is set to. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now