Pig Posted January 12, 2008 Share Posted January 12, 2008 Am i the last surviving turbofit engine build? I had to get there oil leak sorted else where as they couldnt find it. Does anyone know of any other that are still alive and taking abuse? Quote Link to comment Share on other sites More sharing options...
grahamc Posted January 12, 2008 Share Posted January 12, 2008 mine was going well Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 12, 2008 Share Posted January 12, 2008 I was just thinking this a min ago:blink: I think IanR's was one and Gazzagsi and Matt H? I killed mine mine by cooking the oil (racing an RS6), should have had an oil cooler:( Quote Link to comment Share on other sites More sharing options...
Pig Posted January 12, 2008 Author Share Posted January 12, 2008 Matt H and Grahams are still running on twins. GazzaGSI, dont suppose he has a blue car with a carbon bonnet? - Answers: no, his was black. (The one im talking about is the same colour as Gaz1's and supradibbs. It has a TRD rear spoiler) Ian R's, not sure what happened there in the end. What about private piles? Quote Link to comment Share on other sites More sharing options...
neil tt Posted January 12, 2008 Share Posted January 12, 2008 Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 12, 2008 Share Posted January 12, 2008 Matt H and Grahams are still running on twins. GazzaGSI, dont suppose he has a blue car with a carbon bonnet? Ian R's, not sure what happened there in the end. What about private piles? Dans (Private piles) got rebuilt by JPS but he is still not happy. Quote Link to comment Share on other sites More sharing options...
Pig Posted January 12, 2008 Author Share Posted January 12, 2008 Dans (Private piles) got rebuilt by JPS but he is still not happy. Is JPS the place on the same estate? Whats up with it? I know he used to get a hell of a lot of piston slap etc. Quote Link to comment Share on other sites More sharing options...
Godmutha Posted January 12, 2008 Share Posted January 12, 2008 Matt H and Grahams are still running on twins. Theoretically... Matt's aint runnin anywhere at the mo.... and is gettin a complete transplant, so I dare say any issues will be spotted and sorted. Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 12, 2008 Share Posted January 12, 2008 Is JPS the place on the same estate? Whats up with it? I know he used to get a hell of a lot of piston slap etc. No thats JDP, i heard the story secondhand from Jonty so wont repeat on here. Quote Link to comment Share on other sites More sharing options...
dandan Posted January 12, 2008 Share Posted January 12, 2008 I was just thinking this a min ago:blink: I think IanR's was one and Gazzagsi and Matt H? I killed mine mine by cooking the oil (racing an RS6), should have had an oil cooler:( What happened to yours Jamie? Quote Link to comment Share on other sites More sharing options...
Pig Posted January 12, 2008 Author Share Posted January 12, 2008 No thats JDP, i heard the story secondhand from Jonty so wont repeat on here. Fair enough. Did Jonty have a built engine? Is his still alive? and did he sell in the end. Jon Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 12, 2008 Share Posted January 12, 2008 Fair enough. Did Jonty have a built engine? Is his still alive? and did he sell in the end. Jon Jontys was done by tunning jap and has held up well, his is going into KR in a couple of weeks to replace the veilside kit with something more modern then its back up for sale. He has a new M5 he is running about in now and looking at getting a gallardo:cool: Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 12, 2008 Share Posted January 12, 2008 What happened to yours Jamie? I cooked the oil and spun a shell. Quote Link to comment Share on other sites More sharing options...
dandan Posted January 13, 2008 Share Posted January 13, 2008 I cooked the oil and spun a shell. Oh dear I take it that it was either a modded RS6 or you must have been completely murdering it?? Quote Link to comment Share on other sites More sharing options...
supradibbs Posted January 13, 2008 Share Posted January 13, 2008 I cooked the oil and spun a shell. Now fully rebuilt and ready too do battle:d Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 13, 2008 Share Posted January 13, 2008 Oh dear I take it that it was either a modded RS6 or you must have been completely murdering it?? Murdering it but he kept catching me in traffic. Quote Link to comment Share on other sites More sharing options...
tucky40 Posted January 13, 2008 Share Posted January 13, 2008 Private Pile is still waiting on his gear box to get sorted, he still hasnt had a chance to run in the engine from jps yet. Quote Link to comment Share on other sites More sharing options...
Private Pile Posted January 13, 2008 Share Posted January 13, 2008 Hi Lads, I ended up getting my turbofit engine rebuilt as they decided to use some kind of sealant to prevent air leaking from the Greddy Intake manifold... and it ended up inside the engine, and caused enough damage to warrant a complete strip down! Even the crank bearings were buggered! So, I got JPS to start from scratch, upgrading nearly everything, including work on the head and 4" piping throughout... to correct Jamie's statement, I wasn't happy with the gearbox refirb I'd had done (it was sent to a gearbox specialist... well, that's what he called himself)... after having the box for 4 months I was quite peeed off when it kept jumping out of 1st gear and making grinding/crunching noises! Having spent alot of money (again!!!) and waiting almost 6 months I didn't expect any further problems. As far as JPS is concerned, so far I've been impressed with the level of expertise and advise they've given me. Although I've ended up spending alot more money then I'd hoped, my engine feels a world apart from the Turbofit gash I'd had before. I managed 500 miles before Leon picked the car up to get the gearbox re-done and the car has never felt so strong... even the vibration through the steering wheel has disappeared. Apparently the gearbox problem has been sorted now so I should get the car back shortly to continue the run in phase. Interestingly, despite the alleged problems with Dan Turner, Leon has inspected his work on my ecu and sat in with Dan when he completed the base map and has no concerns over his technical ability and workmanship. Having guaranteed the engine rebuild I doubt Leon would take any unnecessary risks. Having had my fingers burned throughout my modifying experience, my advise to anyone carrying out technical modifications are as follows: 1. If you have a budget of £5k, plan to spend £2.5k... your remaining £2.5k WILL go! 2. Choose your tuning garage wisely... especially for engine rebuilds and ecu tuning. In this case choose a garage and give them complete control over both the build and the ecu mapping so as to avoid any conflict when things go bang. I gave Leon carte blanche to build my engine and tune it to his spec... that way if anything breaks it's his responsibilty... this includes boost settings! Also, JPS have proven race experience which should play a big part in choosing your tuner. 3. Avoid the cheap option... it'll cost you. Good luck! PP Quote Link to comment Share on other sites More sharing options...
supradibbs Posted January 13, 2008 Share Posted January 13, 2008 Hi Lads, I ended up getting my turbofit engine rebuilt as they decided to use some kind of sealant to prevent air leaking from the Greddy Intake manifold... and it ended up inside the engine, and caused enough damage to warrant a complete strip down! Even the crank bearings were buggered! So, I got JPS to start from scratch, upgrading nearly everything, including work on the head and 4" piping throughout... to correct Jamie's statement, I wasn't happy with the gearbox refirb I'd had done (it was sent to a gearbox specialist... well, that's what he called himself)... after having the box for 4 months I was quite peeed off when it kept jumping out of 1st gear and making grinding/crunching noises! Having spent alot of money (again!!!) and waiting almost 6 months I didn't expect any further problems. As far as JPS is concerned, so far I've been impressed with the level of expertise and advise they've given me. Although I've ended up spending alot more money then I'd hoped, my engine feels a world apart from the Turbofit gash I'd had before. I managed 500 miles before Leon picked the car up to get the gearbox re-done and the car has never felt so strong... even the vibration through the steering wheel has disappeared. Apparently the gearbox problem has been sorted now so I should get the car back shortly to continue the run in phase. Interestingly, despite the alleged problems with Dan Turner, Leon has inspected his work on my ecu and sat in with Dan when he completed the base map and has no concerns over his technical ability and workmanship. Having guaranteed the engine rebuild I doubt Leon would take any unnecessary risks. Having had my fingers burned throughout my modifying experience, my advise to anyone carrying out technical modifications are as follows: 1. If you have a budget of £5k, plan to spend £2.5k... your remaining £2.5k WILL go! 2. Choose your tuning garage wisely... especially for engine rebuilds and ecu tuning. In this case choose a garage and give them complete control over both the build and the ecu mapping so as to avoid any conflict when things go bang. I gave Leon carte blanche to build my engine and tune it to his spec... that way if anything breaks it's his responsibilty... this includes boost settings! Also, JPS have proven race experience which should play a big part in choosing your tuner. 3. Avoid the cheap option... it'll cost you. Good luck! PP Really sound advise there Dan, i was acctualy talking to the guy at JPS yesterday and we were discussing your build Quote Link to comment Share on other sites More sharing options...
bignum Posted January 13, 2008 Share Posted January 13, 2008 I was just thinking this a min ago:blink: I think IanR's was one and Gazzagsi and Matt H? I killed mine mine by cooking the oil (racing an RS6), should have had an oil cooler:( What oil temps were you seeing jamie? Quote Link to comment Share on other sites More sharing options...
JamieP Posted January 13, 2008 Share Posted January 13, 2008 What oil temps were you seeing jamie? I cant remember the numbers tbh. Quote Link to comment Share on other sites More sharing options...
Muffleman Posted January 13, 2008 Share Posted January 13, 2008 Hi Lads, I ended up getting my turbofit engine rebuilt as they decided to use some kind of sealant to prevent air leaking from the Greddy Intake manifold... and it ended up inside the engine, and caused enough damage to warrant a complete strip down! Even the crank bearings were buggered! So, I got JPS to start from scratch, upgrading nearly everything, including work on the head and 4" piping throughout... to correct Jamie's statement, I wasn't happy with the gearbox refirb I'd had done (it was sent to a gearbox specialist... well, that's what he called himself)... after having the box for 4 months I was quite peeed off when it kept jumping out of 1st gear and making grinding/crunching noises! Having spent alot of money (again!!!) and waiting almost 6 months I didn't expect any further problems. As far as JPS is concerned, so far I've been impressed with the level of expertise and advise they've given me. Although I've ended up spending alot more money then I'd hoped, my engine feels a world apart from the Turbofit gash I'd had before. I managed 500 miles before Leon picked the car up to get the gearbox re-done and the car has never felt so strong... even the vibration through the steering wheel has disappeared. Apparently the gearbox problem has been sorted now so I should get the car back shortly to continue the run in phase. Interestingly, despite the alleged problems with Dan Turner, Leon has inspected his work on my ecu and sat in with Dan when he completed the base map and has no concerns over his technical ability and workmanship. Having guaranteed the engine rebuild I doubt Leon would take any unnecessary risks. Having had my fingers burned throughout my modifying experience, my advise to anyone carrying out technical modifications are as follows: 1. If you have a budget of £5k, plan to spend £2.5k... your remaining £2.5k WILL go! 2. Choose your tuning garage wisely... especially for engine rebuilds and ecu tuning. In this case choose a garage and give them complete control over both the build and the ecu mapping so as to avoid any conflict when things go bang. I gave Leon carte blanche to build my engine and tune it to his spec... that way if anything breaks it's his responsibilty... this includes boost settings! Also, JPS have proven race experience which should play a big part in choosing your tuner. 3. Avoid the cheap option... it'll cost you. Good luck! PP Yup, some sage advice in there from first hand experience. Just a shame members have to experience it really Quote Link to comment Share on other sites More sharing options...
T2 MSW Posted January 13, 2008 Share Posted January 13, 2008 It is a shame people have to go through this pain. But things go wrong from time to time and I believe such times are when companies can really demonstrate how exceptional they are. Unfortunalty in some of these examples the company involved have just washed their hands of it. Quote Link to comment Share on other sites More sharing options...
GazzaGSi Posted January 13, 2008 Share Posted January 13, 2008 Mines still going but heard there is a slight missfire at the minute. Sounds like leads and plugs which I wouldnt be suprised at as its been awhile since they were done. Ive read about all the heartache people received from TF and even seen some of their dodgy stuff but mine was awesome and pulled really well running mid 12sec 1/4's. Had the NA-T conversion done nearly 2 years ago and never got any major issues. Mine wasnt a complete rebuild though. Just had a 2mm headsasket fitted with abit of headwork and then obviously the turbo kit. Never used jps but from what Ive heard they sound good. As for jdp, they can fu*k (does this comply with the no swearing on public forum) right off. Quote Link to comment Share on other sites More sharing options...
Pig Posted January 13, 2008 Author Share Posted January 13, 2008 Thanks private pile. sorry to see the shit is still going on for you. once bitten, forever shy. I now use TDI (f**ng expensive) but my car hasnt failed yet and i kick the living s**out of it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.