b_have Posted January 11, 2008 Share Posted January 11, 2008 Doing the usual winter project (tearing my car into a million bits!) This year, fitting a high flow inlet & headwork. Also decided to go for a super quiet 600bhp (getting old!) so have fitted a Tenabe exhaust and losing the screamer pipe. Just mocked up the WG~downpipe for connection, need a 60mm flexifitting to weld in. Anyone have one or recommend a supplier in the UK? Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 11, 2008 Share Posted January 11, 2008 http://www.sstubetechnology.com/contact.htm have the proper convoluted bellows flexi sections, but it's expensive. Link to comment Share on other sites More sharing options...
b_have Posted January 11, 2008 Author Share Posted January 11, 2008 Thanks Chris, will give them a call. Also found these http://cgi.ebay.co.uk/EXHAUST-FLEXIBLE-JOINT-FLEXI-PIPE-SS-WELD-ON-100x60_W0QQitemZ320116812652QQihZ011QQcategoryZ9886QQtcZphotoQQcmdZViewItem Any good? Link to comment Share on other sites More sharing options...
Chris Wilson Posted January 11, 2008 Share Posted January 11, 2008 Mild steel, won't last long with the heat. Link to comment Share on other sites More sharing options...
Pig Posted January 11, 2008 Share Posted January 11, 2008 Also decided to go for a super quiet 600bhp when you say super quiet. Do you think you might be able to be sub 95 db? Link to comment Share on other sites More sharing options...
SimonB Posted January 11, 2008 Share Posted January 11, 2008 What are you doing inlet wise Charlie, new inlet manifold? Link to comment Share on other sites More sharing options...
b_have Posted January 11, 2008 Author Share Posted January 11, 2008 when you say super quiet. Do you think you might be able to be sub 95 db? Yes, tested the Tanabe after fitting and seems similar to stock (until the WG opens) Makes the compressor stall sound scarey! Link to comment Share on other sites More sharing options...
b_have Posted January 11, 2008 Author Share Posted January 11, 2008 What are you doing inlet wise Charlie, new inlet manifold? Yes, in the middle of dry fitting, moved the ps res/battery/fusebox etc. Loosing about a foot of ic pipework! Link to comment Share on other sites More sharing options...
SimonB Posted January 11, 2008 Share Posted January 11, 2008 Yes' date=' in the middle of dry fitting, moved the ps res/battery/fusebox etc. Loosing about a foot of ic pipework![/quote'] Which one are you going for? Or are you custom making something? Think I'll be joining you with the Tanabe soon, either that or a GReddy Ti-R. Link to comment Share on other sites More sharing options...
b_have Posted January 11, 2008 Author Share Posted January 11, 2008 Which one are you going for? Or are you custom making something? Think I'll be joining you with the Tanabe soon, either that or a GReddy Ti-R. Its a Jun clone with taperbored runners. Drop by if your passing and take a look Link to comment Share on other sites More sharing options...
rpslaughter1982 Posted January 11, 2008 Share Posted January 11, 2008 I've got stuff from here before http://www.dynoflow.co.uk Link to comment Share on other sites More sharing options...
b_have Posted January 11, 2008 Author Share Posted January 11, 2008 I've got stuff from here before http://www.dynoflow.co.uk Great site, many thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now