Sharpie Posted January 10, 2008 Share Posted January 10, 2008 I have my XD-1 installed and the LC-1 ready to go on the car but, would I be right in saying that the push button between the ground and calibration wire AND the LED are just optional nice to have ? i.e. I can just get on with the free air and sensor heater calibrations without them ? Cheers Link to comment Share on other sites More sharing options...
Ryan.G Posted January 11, 2008 Share Posted January 11, 2008 They are not needed to be Permanently installed but dont loose them as the LED is there for showing error codes. And if you ever remove the sensor again then a Free air Calibration is required after the sensor has been left out the exhaust over night. Ryan Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now