Reesen Posted January 9, 2008 Share Posted January 9, 2008 Just found out that my wg´s spring is 10,15 psi, and im gonna boost more then that to retch 500-600bhp! So were can I get some harder springs for this WG? Found some at xs power, but they only go up to 8.7psi! What to do? http://www.racerbits.com/catalog/WG-50MM.jpg Link to comment Share on other sites More sharing options...
kieren1234 Posted January 9, 2008 Share Posted January 9, 2008 Here you go mate: http://www.ssautochrome.com/level.itml/icOid/1546 All the way up to 1.6 BAR. Link to comment Share on other sites More sharing options...
Reesen Posted January 9, 2008 Author Share Posted January 9, 2008 And they shoild fit my wg? Link to comment Share on other sites More sharing options...
kieren1234 Posted January 9, 2008 Share Posted January 9, 2008 Should do mate, i would send them a picture of the WG and double check. Link to comment Share on other sites More sharing options...
Reesen Posted January 9, 2008 Author Share Posted January 9, 2008 I´ll do.. Thank´s mate Link to comment Share on other sites More sharing options...
Sean1933 Posted January 9, 2008 Share Posted January 9, 2008 Why not just use a boost controller to regulate boost ??? Link to comment Share on other sites More sharing options...
Reesen Posted January 9, 2008 Author Share Posted January 9, 2008 im gonna use a boost controller.. But wont the WG not just open when I hit the springs max psi? Link to comment Share on other sites More sharing options...
Sean1933 Posted January 9, 2008 Share Posted January 9, 2008 No. You dont need to worry about WG spring really, as long as the spring is not too strong for what you want, ie if the WG spring is 2 bar and you only want to run 1 bar...it wont work that way around. Basically a boost controller bleeds off air until the desired pressure is reached as set on the controller, then it allows the WG to open. Link to comment Share on other sites More sharing options...
Reesen Posted January 9, 2008 Author Share Posted January 9, 2008 Tnak´s.. I was just a bit woryéd when I found out that it was only a aprox 1 bar spring, dident know that it woulden meen anything! Thank+s for the info Link to comment Share on other sites More sharing options...
Recommended Posts