adi2009 Posted January 7, 2008 Share Posted January 7, 2008 Hi Guys, recently I ve noticed that occasionally during hard acceleration the ignition cuts out momentarily. This doesnt happen always but very randomly, for instance I was accelerating hard through first gear then shifted to 2nd and when I floored it the engine just cut out momentarily. Any ideas what this could be due to??? Cheers adi Quote Link to comment Share on other sites More sharing options...
cheekymonkey Posted January 7, 2008 Share Posted January 7, 2008 Sounds like Fuel Cut Quote Link to comment Share on other sites More sharing options...
tooquicktostop Posted January 7, 2008 Share Posted January 7, 2008 Do you have the stock Traction Control switched on or off when this happens Quote Link to comment Share on other sites More sharing options...
adi2009 Posted January 7, 2008 Author Share Posted January 7, 2008 No I ve got a Greddy BCC installed and it happens much before full boost. I dont have traction control on my car since its a NA-TT swap Quote Link to comment Share on other sites More sharing options...
miko_supra Posted January 7, 2008 Share Posted January 7, 2008 its not right before the second turbo comes in is it? as this seems to be a common problem and hasnt been fully diagnosed. possibly a vaulty valve in the sequential system Quote Link to comment Share on other sites More sharing options...
adi2009 Posted January 7, 2008 Author Share Posted January 7, 2008 its not right before the second turbo comes in is it? as this seems to be a common problem and hasnt been fully diagnosed. possibly a vaulty valve in the sequential system Yes actually I think it is about then. I was under the impression that it might be some loose connections in the wiring loom but now since you say that it is common I m not sure. This never used to happen, I ve just noticed it the past 2 weeks. Quote Link to comment Share on other sites More sharing options...
miko_supra Posted January 7, 2008 Share Posted January 7, 2008 sinse i've had my engine in its happened once at about 4/4.5k rpm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.