miko_supra Posted December 31, 2007 Share Posted December 31, 2007 i have a concept 650 fitted to my car, and pretty much nothing works on it. it has been slowly deteriorating for the past year or so. it was fitted before i bought the car. what it does... -it locks and unlocks -it has a pathetic proximity detector. an elephant could run into the side of it and it would take it half an hour to realize. -the alarm siren happily works what it doesn't do -the proximity warning chirps do not happen, it just chirps once and then goes off immediately -the door sensors are somewhat none existent -is there supposed to be tilt sensors on this too? if so, my one doesn't i have and installation certificate and i know Clifford have a 1 years warranty on their products, but its been on the car almost 2 years so thats out the window. i've already contacted Clifford about it, but haven't had a reply yet. how much do you reckon i am going to be charged to sort all of this? and why is it so BAD, has it been fitted by some monkeys? or have others experienced this? Quote Link to comment Share on other sites More sharing options...
jazz1 Posted December 31, 2007 Share Posted December 31, 2007 i just had a shock sensor put on mine my car started doing 2 chirps of u go near it, now its gone back to the one all of a sudden but im taking it back to the guys on wednesday to make them sort it Quote Link to comment Share on other sites More sharing options...
jazz1 Posted December 31, 2007 Share Posted December 31, 2007 have you tryed re-seeting it? does anybody know how to do that? Quote Link to comment Share on other sites More sharing options...
2JG Posted December 31, 2007 Share Posted December 31, 2007 i had this on my old calibra, it all worked fine for the first 3.5 years and then started playing up. the place who installed it couldn't figure out what the problem was even though they tried replacing sensors etc. (apparently). sold the car before a resolution was found Quote Link to comment Share on other sites More sharing options...
Ric Posted December 31, 2007 Share Posted December 31, 2007 the proxy has no tunable things on it, unless they've used the directed one rather than the actual clifford one, as it all has to be done through cliffwizard thing or through valet mode on the remote, check your owners book As for the shock sensor that has a little knob on it which you turn, more and less sensativity As for the door sensors, more than likely connected to your interior light circuit, does that work ok? or you have faulty door switches on the car itself Quote Link to comment Share on other sites More sharing options...
miko_supra Posted December 31, 2007 Author Share Posted December 31, 2007 interior lights are all fine and work ok with the doors. where is the knock sensor located normally? Quote Link to comment Share on other sites More sharing options...
hadyn Posted December 31, 2007 Share Posted December 31, 2007 clifford alarms are the work of the devil Quote Link to comment Share on other sites More sharing options...
RobSheffield Posted December 31, 2007 Share Posted December 31, 2007 clifford alarms are the work of the devil why? My 2 are perfect Quote Link to comment Share on other sites More sharing options...
n boost Posted December 31, 2007 Share Posted December 31, 2007 I have a clifford 650 used for sale. PM me if interested. Quote Link to comment Share on other sites More sharing options...
jazz1 Posted December 31, 2007 Share Posted December 31, 2007 funny my two chrips come back after i put the cover over the car it goes to one chirp then when i drive it it goes back to two chirps for the shock sensor? Quote Link to comment Share on other sites More sharing options...
Angarak Posted December 31, 2007 Share Posted December 31, 2007 I thought clifford 650's where under warranty for as long as you have the car? Take it to a certified Clifford Specialist. Quote Link to comment Share on other sites More sharing options...
miko_supra Posted December 31, 2007 Author Share Posted December 31, 2007 I thought clifford 650's where under warranty for as long as you have the car? Take it to a certified Clifford Specialist. interesting. i will have to look into this Quote Link to comment Share on other sites More sharing options...
miko_supra Posted December 31, 2007 Author Share Posted December 31, 2007 managed to find a friend of a friend who installs these who will fix it for me this week, which is nice Quote Link to comment Share on other sites More sharing options...
Snooze Posted December 31, 2007 Share Posted December 31, 2007 You can adjust the proximity sensor sensitivity using the valet switch, but it only explains it in the installers guide, not the user's guide. Haven't got it with me here, but if you're still after the instructions in a couple of days, drop me a PM and I'll send them on. Quote Link to comment Share on other sites More sharing options...
jazz1 Posted December 31, 2007 Share Posted December 31, 2007 You can adjust the proximity sensor sensitivity using the valet switch, but it only explains it in the installers guide, not the user's guide. Haven't got it with me here, but if you're still after the instructions in a couple of days, drop me a PM and I'll send them on. hey send them to me please Quote Link to comment Share on other sites More sharing options...
hadyn Posted January 1, 2008 Share Posted January 1, 2008 You can adjust the proximity sensor sensitivity using the valet switch, but it only explains it in the installers guide, not the user's guide. Haven't got it with me here, but if you're still after the instructions in a couple of days, drop me a PM and I'll send them on. Same here too, can you send them to me as well? Quote Link to comment Share on other sites More sharing options...
Matt Harwood Posted January 1, 2008 Share Posted January 1, 2008 A little clarity needed here I think... i had this on my old calibra, it all worked fine for the first 3.5 years and then started playing up. the place who installed it couldn't figure out what the problem was even though they tried replacing sensors etc. (apparently). sold the car before a resolution was found clifford alarms are the work of the devil Clifford alarms, IMO, are excellent. Sadly there are many people out there that have no idea how to fit a Clifford properly. They CANNOT be rushed. They're not a fit-and-forget type alarm like most out there. They need yo be installed by people that are conscientious about their work and take the time to set them up properly. Nearly all Clifford problems are either down to the installer, who couldn't be bothered to set them up properly, or down to the user, for nut understanding/reading the instructions. the proxy has no tunable things on it, unless they've used the directed one rather than the actual clifford one, as it all has to be done through cliffwizard thing or through valet mode on the remote, check your owners book As for the shock sensor that has a little knob on it which you turn, more and less sensativity Depends which shock sensor is used. The Omni-sensor is adjusted via the remote control in the same way as the Dual Zone Proximity sensor. The basic shock sensor is the one that has a knob on the side. I thought clifford 650's where under warranty for as long as you have the car? Take it to a certified Clifford Specialist. Nope. A Clifford has a guarantee for parts and labour for 1 year. The labour part of that is only covered by the ORIGINAL installer. The alarm control unit and remote controls have a lifetime warranty against defects, (not poor setting up, or water damage or physical breakage, or blown up etc.). But this warranty is ONLY to the original purchaser and must be submitted for repair with a copy of the original invoice. You can adjust the proximity sensor sensitivity using the valet switch, but it only explains it in the installers guide, not the user's guide. Haven't got it with me here, but if you're still after the instructions in a couple of days, drop me a PM and I'll send them on. The Dual Zone Proximity sensor is adjusted using the MASTER remote control only. Not the valet switch. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.