tooquicktostop Posted December 26, 2007 Share Posted December 26, 2007 These are getting dropped off at Phoenix on 2nd Jan and thats all the bits in place to complete the engine build, wont be long now Will post some pics of all the parts on Tuesday Brian Crower H Beam rods Link to comment Share on other sites More sharing options...
miko_supra Posted December 26, 2007 Share Posted December 26, 2007 have you got a thread on what your doing? Link to comment Share on other sites More sharing options...
tooquicktostop Posted December 26, 2007 Author Share Posted December 26, 2007 Will add to this thread on Tuesday http://www.mkivsupra.net/vbb/showthread.php?t=125388&highlight=rebuild+thread Link to comment Share on other sites More sharing options...
MrRalphMan Posted December 26, 2007 Share Posted December 26, 2007 Hey Dean, Any idea how long it's going to take once they start? Bet you cannot wait. Link to comment Share on other sites More sharing options...
Matt Harwood Posted December 26, 2007 Share Posted December 26, 2007 Dean, out of interest, can you weigh one of those, complete with bolts. Link to comment Share on other sites More sharing options...
tooquicktostop Posted December 27, 2007 Author Share Posted December 27, 2007 Dean, out of interest, can you weigh one of those, complete with bolts. I will weigh one as post it up later;) Link to comment Share on other sites More sharing options...
tooquicktostop Posted December 27, 2007 Author Share Posted December 27, 2007 Hey Dean, Any idea how long it's going to take once they start? Bet you cannot wait. Should be running in by the second week of January all being well Link to comment Share on other sites More sharing options...
DamanC Posted December 27, 2007 Share Posted December 27, 2007 Nice Link to comment Share on other sites More sharing options...
gaz1 Posted December 27, 2007 Share Posted December 27, 2007 thelast of my bits should get here today, then mine will be going up on the 2nd also;) might see you there Link to comment Share on other sites More sharing options...
tooquicktostop Posted December 27, 2007 Author Share Posted December 27, 2007 thelast of my bits should get here today, then mine will be going up on the 2nd also;) might see you there Will be there all afternoon on the 2nd taking some pictures etc so there is a good chance Link to comment Share on other sites More sharing options...
magictorch Posted December 27, 2007 Share Posted December 27, 2007 Mines due down at Phoenix in early January as well but i still havent decided whether to get my auto/manual conversion done first.....lol Link to comment Share on other sites More sharing options...
tooquicktostop Posted December 27, 2007 Author Share Posted December 27, 2007 Mines due down at Phoenix in early January as well but i still havent decided whether to get my auto/manual conversion first done first.....lol What you having done ?? Mark does the Auto to Manual conversion as well if you get him the bits Link to comment Share on other sites More sharing options...
magictorch Posted December 27, 2007 Share Posted December 27, 2007 I have a single kit to go on my car ( GT4088 ) and lots of supporting mods but not sure what to do now as im running an auto, ultimately want to go manual so im thinking of doing that first now... My car was booked in for Oct but got held up waiting for some parts:( Link to comment Share on other sites More sharing options...
tooquicktostop Posted December 27, 2007 Author Share Posted December 27, 2007 I have a single kit to go on my car ( GT4088 ) and lots of supporting mods but not sure what to do now as im running an auto, ultimately want to go manual so im thinking of doing that first now... My car was booked in for Oct but got held up waiting for some parts:( Mine has been with Mark for almost 4 Months waiting for parts and changing of spec (my fault) I ran an auto with the T04R and it held up OK for some time, it did start slipping badly in the end though, the car had a six speed conversion and the drivability is much improved but it is not a daily driver so the town driving is not an issue Link to comment Share on other sites More sharing options...
magictorch Posted December 27, 2007 Share Posted December 27, 2007 How much power were you putting throught it? Mine isnt a daily driver either, although if i go manual first i will have more options with the ECU:) Jamie Mine has been with Mark for almost 4 Months waiting for parts and changing of spec (my fault) I ran an auto with the T04R and it held up OK for some time, it did start slipping badly in the end though, the car had a six speed conversion and the drivability is much improved but it is not a daily driver so the town driving is not an issue Link to comment Share on other sites More sharing options...
tooquicktostop Posted December 27, 2007 Author Share Posted December 27, 2007 How much power were you putting throught it? Mine isnt a daily driver either, although if i go manual first i will have more options with the ECU:) Jamie I ran 550 BHP through it on high boost, about 450 low boost, I also ran an AEM with the auto box with no issues Link to comment Share on other sites More sharing options...
tooquicktostop Posted January 9, 2008 Author Share Posted January 9, 2008 Just purchased these to go on to the car when its ready in a week or so, wanted to move away from 19" wheels Link to comment Share on other sites More sharing options...
MrRalphMan Posted January 9, 2008 Share Posted January 9, 2008 Ohhh, they are very nice.... Link to comment Share on other sites More sharing options...
Inferno Posted January 21, 2008 Share Posted January 21, 2008 I will weigh one as post it up later;) Any luck getting the weights? Thanks! Link to comment Share on other sites More sharing options...
tooquicktostop Posted January 21, 2008 Author Share Posted January 21, 2008 Any luck getting the weights? Thanks! This is what I got from Brian Crower, dont know if it makes sence The rods we have in stock right now are "I" beam and the weight are 495/210. The bolts weigh 57 grams. Thank you, Dustin Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now