Robert Posted December 14, 2007 Share Posted December 14, 2007 Ok i have this Gauge Tech monitor for the AEM EMS, it is a lovely bits of kit and i can't remember seeing another car with one. It has software which helps you set out the interface on each of the 4 screen, you can select from loads of different things to monitor from the AEM. You can have gauges, text box'ss or meter bars to show the information on the display. It simply connects to the AEM via the serial connector and is powered by the cigarette port. I am selling it for £250 which includes Special delivery. The company no longer makes these as far as i know. The unit measures 20cm x 7 cm x 2.5 cm. I've attached a print screen of the PC software you use to change the display interface. Link to comment Share on other sites More sharing options...
tooquicktostop Posted December 14, 2007 Share Posted December 14, 2007 Will this still read the new software on the AEM Link to comment Share on other sites More sharing options...
Robert Posted December 14, 2007 Author Share Posted December 14, 2007 should work perfectly mate, your more than welcome to have a go. It works fine with the firmware on my AEM Link to comment Share on other sites More sharing options...
tooquicktostop Posted December 14, 2007 Share Posted December 14, 2007 Ok could be very interested, need to find out for sure if it works with new firmware tomorrow and will come back if not sold Link to comment Share on other sites More sharing options...
Robert Posted December 14, 2007 Author Share Posted December 14, 2007 i know it works with 1.19 and 1.21 fine Link to comment Share on other sites More sharing options...
Robert Posted December 15, 2007 Author Share Posted December 15, 2007 Sold Link to comment Share on other sites More sharing options...
Recommended Posts