Paul Whiffin

Used RPS carbon carbon twin plate clutch with flywheel for the 6 speed Supra. This is one of the early versions of the RPS clutch, not sure how many miles its done since it being fitted but it was all in good working condition when removed from the car. £1000 inc UK delivery.

Well thats the wiring loom done pretty much, got to put it back on the car now. Also a better picture of the Hypertune 12 injector inlet runners with the special order black anodising I had done. 12x 1100cc Asnu injectors are on there way.....I've sent the Hypertune plenum off to have it neo chromed along with the cam covers and a few other bits which should give the engine bay some wow factor. I need to decide on which turbo to go with now, decisions decisions.

Not much to report as I've been so busy building customers cars! Fitted a nice new Momo Mod 78 suede steering wheel: And here is where the wiring is at right now, bit of a mess but its getting there believe it or not:

Used Greddy 4 row 5" thick Supra intercooler for sale, £500 with free uk delivery included.

Loads in stock for next day delivery as well, I'll do you a bit off if you want a set?

AN4 with no restrictor is correct, that's what we've been using/supplying for about 9 years now on these turbos.

The 82mm ID body is off a Maserati, Bosch part number 0280750101, you can see all of the different types listed here http://www.bosch-motorsport.com/media/catalog_resources/Electronic_Throttle_Body_Datasheet_51_en_10726070795pdf.pdf Look out for them on ebay, they come up quite a lot on there...

Correct.

That's 82mm ID though with a 90mm OD, perfect for what you need. You will need to put a lip on the throttle body though as its meant for a NA engine. We've run this throttle body up to 900bhp so far.

Nothing here unfortunately, I've got a used one but I'm keeping hold of that.

Sorry just checked and it's got a corner missing off it.

Which model do you need it from?

I've got a couple here if you get stuck.

Got one here if needed...

This might take awhile as we are doing this in our spare time which we dont have much of! Since the car isn't being used as an out and out track car right now and I wanted something slightly more comfortable than the Cobra Evolutions seats it had, I've gone back to my favorite seats, the Recaro Pole Position seats in leather/suede. Mounted on fixed frames made in house here. I wanted them as low as they will go and you just cant get that using sliding frames Engine wiring loom modified, this is what we've removed thats no longer needed. Standard knock sensors, oil pressure sensor, air con wiring, stock tps and traction wiring, sequential turbo wiring, diagnostic port, etc all in the bin. More pics to follow of the new loom soon....

Sold

I thought it was about time we got the old girl out of the garage again, it hasn't moved for nearly 2 years! A few updates planned: Syvecs S6Plus ecu instead of the S6GP ecu it had. Full custom engine wiring loom removing all unused wires and hard wiring direct to the Syvecs so no harness adaptors required. Update the Racepak dash to can data stream from the Syvecs. Hypertune 12 injector inlet manifold with 12x Asnu 1050cc injectors staged fuel pumps and injectors. Bosch 90mm drive by wire throttle conversion. 3x Walbro 450lph fuel pumps with Goodridge super lightweight G-line E85 fuel lines and fuel flex sensor to run E85 fuel. Recaro Pole Position suede/leather seats to replace the Cobra Evolution seats. Neo chrome turbo, cam covers and inlet manifold. Might change the turbo, not sure yet. Might also paint the engine bay while its apart as its looking a bit tired. Updates to follow!

It's actually off my car yes, not breaking though, updating with a 12 injector version and DBW throttle and a few other bits and bobs.

I can get it polished up for an extra cost if needed....

I've got one here.

These don't come up to often used so be quick! The best inlet manifold for the 2JZ-GTE on the planet made by Hypertune. This one is the small port version with 6 injector fuel rail and 90mm throttle. We've used this inlet manifold to produce over 1300bhp on the Whifbitz Supra.... New this would be £2418 at the moment, this is available for £1500.

See here http://www.garagewhifbitz.co.uk/toyota/supra/toyota-oem-parts/body-parts.html

We have them in stock.

We have new ones in stock if you can't find used.