Paul Whiffin
-
Posts
8272 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Paul Whiffin
-
to all you veilside/other body kitted supra owners
Paul Whiffin replied to Craig Sawyer's topic in mkiv Technical
Hi there, With one of my bumpers on you do have to be careful yes but you can get over speed bumps without it scraping, but you do have to go over them really slowly. This is the sacrifice you make for the fantastic looks the bumper has. My car has 19" wheels and Eibachs lowering springs fitted and I have 4" ground clearance, any less would be a problem. Cheers Paul -
The rear floor lower supports mount lengthways underneath the car and the cross brace mounts behind the seats, both are great for the aero top and can't do any harm(apart from add weight)to a hardtop either. Nice bit of kit.
-
Do-Luck sell them, all prices on my site.
-
I tried to get hold of those defi gauges once before, it never happened for one reason or another, your right though they are suppose to be very good. Haven't got any pics of the front bars unfortunately, sorry Nic. I'd imagine they look pretty similar to the front bar but in carbon, here's a picture of my car with the front bar on.
-
All on my web site, http://www.whifbitz.co.uk/suprasuspension.htm
-
I can get these in about 2 weeks if needed no problem at all, any of the Cusco ones. In fact I can get anything from Japan pretty quickly if required. Regards Paul
-
Don't know haven't fitted an AVC-R yet, sorry. Have you looked at the manuals on USA Apexi site?
-
Hello.
-
Very easy to fit, I can of course supply the Porties if needed.
-
I've been using a Max series with std plate for about 18000 miles with no problems at all, more than up to the job in hand. I've still got it in with the single turbo as well, we shall soon see if it holds up to that kind of abuse, not to sure it will, might have to go for a 6 puck job.
-
Yee, http://www.turboclutch.com they are a USA based company, I can have the parts sent direct to you in HK if needed or sent to me and then sent to your UK address. Apparently the RPS one is the exact same clutch as the TRD one but massively cheaper. Cheers Paul
-
Hi Nic, Definately go for an RPS Max series with street disc, more than up to the job, drives like a std clutch with a just a little heavier pedal pressure. They also do a rather nice lightened flywheel as well... E-mail me if your interested. Cheers Paul
-
Thanks chaps.
-
You have to do the oven bake trick to loosen the seal, easy to do just don't be frightened about sticking them in the oven.
-
Anyone got the colour code for a 1995 silver MK4? Its on the chassis plate.
-
Just added the Do-Luck parts on to my web site, go to http://www.whifbitz.co.uk/suprasuspension.htm Popular mod in the USA these are for the aero tops, apparently makes a big difference.
-
I can do all the Do-Luck range of bars and braces, quite a few available actually and superb quality. 1. Rear lower support bars are £205 for steel and £259 for alloy. 2. RXB rear cross brace £172 3. Rear tension set £389 for alloy and £318 for steel. Plus shipping from Japan and UK VAT. Cheers Paul
-
I can do clear front and side indicators from stock, these are genuine Toyota parts. Price is £90 for fronts and £30 for sides plus £6.50 delivery and VAT. Cheers Paul
-
Only if you hits things with them but then the std bumper will get damaged as well. Just have to be a little more careful than normal, its worth it for the looks though.
-
Difficult one this one, I've got 19" wheels and they didn't fit inside them. It all depends on the offset and design of your wheels. This is the reason why I'm in the middle of making my own kits up. The 6 pot caliper I'm using is much smaller than the AP and will fit under more or less any design/offset of wheel. And I'm doing a bigger kit than the AP. Will be available in 330mm, 356mm(same as AP) and 378mm. Cheers Paul
-
Ha ha, he bought the indicators from me, £90 for the fronts and £30 for the sides, both fit straight in and are Genuine Toyota parts. Plus delivery and VAT of course. I can fit them if need be, £30 labour charge, it really updates the front of the car.
-
Now you have those wheels its worthy of my website! Nice rear wing and skirts on your car by the way...And I love those indicators!!
-
I've got a picture of Kev's car on my website at http://www.whifbitz.co.uk/suprabodykitextra1.htm you can see it clearly on that one as its painted.
-
Unichip don't do one for the Supra as yet, although one can be fitted to adjust the fueling only. I will be releasing a fully mappable ECU very soon for the Supra, mines going on when I put me turbo on. Once its on my car I will then start selling them.
-
Not true, you can remove it with the bumper in place. Its pretty easy to remove, might help if you take the headlights out so can undo the bolts that hold it to the chassis.
