Feakins
-
Posts
840 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Feakins
-
Wanted: Radiator for Manual J SPEC.
-
I just pm'd you :D
-
Yep I hope so. Will try and repair it at the weekend to get my by.
-
My car seems to be a prime example of all the common faults i.e. wheel bearing, crank pulley and this!
-
A hah just found this on another thread.
-
Hey, my car seems to have developed a hairline crack along the top of the radiator and started to steam a little. Can this be repaired?? Also about a month ago I noticed my standard radiator cap had no spring so was letting water get into the expansion without a particular pressure being reached. I swapped this for one with a spring can't remember what BAR to prevent future overheating problems. Could this possibly have caused too much pressure in the radiator causing it to split???
-
-
Whoa this is mint. http://www.titanmotorsports.com/qu6su10kmi.html
-
I'm still waiting for mine, top of the list apparently from about 3 months ago!
-
bttt
-
Lol I was thinking more of push bikes :D
-
Some little fucker has stolen 2 of my valve caps. GRRRRRRR.
-
Ahh must of missed your post...Not sure if its old? I am in Reigate, not sure where addlestone is. I might contact you if I get hold of this part for the bottom.
-
I'm thinking of double decat, leave 2 silencers in and get the backbox. I guess this will be quite restrictive though and to get the full benefit of decat you would need a CAT back nur spec.
-
2 of my favs....
-
Yeah the guy worked with D.J. Craig. Apparently the wheels were off an old McClaren, one of a kind. 12 inches wide at the rear!! Didn't like the spoiler tho! It just had some metal mesh for an air filter LOL.
-
Was picking up some bits from Halfords in Redhill and this absolutely mental red supra turns up. Sounded loud and lumpy, ridiculous spolier. Number plate reading 900 BHP. Had a little chat and he opened the bonnet, it was a massive single turbo with a 125 shot of NOS. Over 1100hp. with the NOS. No air filter just a massive tube. Sounded like a rocket when he drove off, said he didn't use any forums though, but is going Santa Pod on Sunday. Look out for it those going jap show, capable of 9's apparently.
-
Its happened to quite a few on here, just do a search on 'crank pulley'. Scooter on this forum kindly help fit a new one which he supplied 2nd hand. Not too hard once you know how to do it but you will need the tool that locks the crankshaft.
-
^^^I have the O ring and a rubber seal thing already. Would very much appreciate it if you could have a look in your garage. Thanks
-
The part labelled number 2 that attaches to the BOV. Also 2 Wheel bolts. Thanks
-
I have the pipe as I brought the fitting kit, am trying to upload a pic of the fitting kit I have also, this seems complete as it came in a sealed bag. So just need to bit on number 2 then! Thanks I will post up.
-
So what do I need to fit it? Have I got to get another part? This is what I have http://www.mkivsupra.net/vbb/attachment.php?attachmentid=40894&d=1154594004
-
Hey, I recently brought a SSQV with the weld on flange 2nd hand. I found out the weld on flange was no good for me so I ordered the fitting kit. However I seem to be missing a part. Should this bit of come with the BOV?? Its the metal thing at the base of the SSQV. I just have a hole in the bottom and nothing that looks like you could fit a pipe to.
-
Must be a member but not on the forum much. I will leave a card on it if I see it again
-
Black with veilside kit, superturismo's and gold badges. Was going to put a card on it but spotted a mkivsupra sticker under a Dragonball Run logo. Right near my house im parked just round the corner from you .
