Nic

Making the exhaust more freer flowing and upping the boost pressure can cause the turbo oil seals to start leaking,

What mpg are you currently getting? When were the oxygen sensors last replaced? new sensors and a service would ensure you’re getting the best from the stock setup.

J-spec (NA & TT) = GSS342 Walbro 255 UK Spec = GSS341 Walbro 255

It would cost £10K's if not £100K's to tool up for such large headlights, you would never recoup the investment and make any profit.

I wouldn't unbox the camshafts they are quite brittle and can break, I'd wrap the boxes in a load of bubble wrap if bringing them back as check in luggage.

The stock 2nd cat has been removed and replaced with a straight through pipe. Not sure what the part is that's clamped at each end, it's not stock but judging by it's size it could be an aftermarket sports cat. That pic doesn't show the first cat it is up between the 2nd cat and the exhaust manifold. This pic from the EPC shows the stock first cat 17460B and second cat 17410.

The Blitz NUR S for the NA only replaces the rear back box, it is designed to bolt up to the stock mid pipe. It gives the NA a little more of a throaty exhaust note without being too loud. See here http://www.blitz-uk.co.uk/store/exhaust-system/ Blitz make a version of the Blitz NUR R (full cat back exhaust) for the NA, it has an additional silencer on the mid pipe compared to the TT version to keep the Db level down to 'reasonable' levels. There must be someone on here with one fitted that may be able to post a video. Does your car have the stock cats fitted? Decat pipes also make a big difference to the exhaust note and Db level on an NA.

The HKS turbo heat shield is designed to fit the T4 T04Z which is made by Garrett. https://www.nengun.com/hks/turbine-heat-shield

I use to run a 3" titanium GReddy (Japan) exhaust on mine, beautiful quality, very light in weight and sounded great, here's a quick clip of it (ignore the rattly PAS pump bearing!) [video=youtube;hU5M-MZcSbI]

Tanabe Touring Medalion and Blitz NUR Spec RX are 2 of the quietest off the shelf exhausts available.

http://www.mkivsupra.net/vbb/showthread.php?249089-Supra-Brake-setups

Amuse make titanium exhausts for the Supra under the name 'TITAN'. If you can find and post up the JASMA number (should be somewhere on the exhaust) that will confirm who the manufacturer is. http://www.webamuse.co.jp/new/products/r1_titan.html#TOYOTA

Do a search for 'heat resistant lock nuts', you could also use some thread lock and a sprung washer. Have you considered swapping the exhaust or getting an additional silencer welded in?

New Force India livery

The UK spec fuel pump flows slightly more than the Walbro 255l/hr, the J-spec pump less. The fitment is also different between the UK and j-spec, these are the codes for the Walbro 255, they are a straight swap for the stock pump. J-spec = Walbro GSS342 UK Spec = Walbro GSS341

China is LHD and I think there are rules that restrict the use of RHD cars, I'm sure there will be some there but it'll be in very very small numbers. I had mine for 10 years in Hong Kong but that is RHD and quite a few were brought in from Japan.

The 'gills' on the nose look like a unique feature. Also good to see the teams putting more of an effort into the liveries of the cars this year

I think you're spot on, Volk Racing F Zero Challenge refurbed in black

.........and the first pics of the Williams https://www.formula1.com/en/latest/headlines/2017/2/williams-release-imagery-of-2017-car.html

Edit, sorry didn't read your post properly.

They are a straight swap, the only problem you'll have is the low beam bulbs (9006) from the UK headlights won't fit in the j-spec headlights. You will need to buy a pair of 9005 bulbs for the low beam and trim a small rib on the wiring loom connector so it'll fit.

I've tested similar LED bulbs in projector high beams, they were very bright but the light scattered and didn't give a good long distance focused beam, the HID kit I have fitted now performs much better.

That kit was made by Roberuta.

http://www.biggred.co.uk do quality calliper rebuild kits.