Lee P
-
Posts
3777 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Lee P
-
Yes, sorry mate Im working at the shop. If you can get hold of a new stronger spring and diaphram in time can have a look tomorrow evening if you want.
-
It's not a boost leak and the compressor housing has the same boost Reading as the manifold. I'm going for wastgate. I think the spring is knackered and it can't hold the boost.
-
IIRC its about 1.4mm
-
Go with stock head gasket Jay its fine for 87mm pistons.
-
If its that wrong and you are so right then why dont you practice what you preach! http://www.mkivsupra.net/vbb/showpost.php?p=2660888&postcount=48 http://www.mkivsupra.net/vbb/showpost.php?p=2660651&postcount=20
-
-
If that is the kit there is not one bit of it that is original HKS 2835. This is a 2835 kit.
-
1. JamieP 2. miko_supra 3. Rob_boi ( maybe unless i can get a definite lift with someone if mines offroad ) 4. Lee P
-
Yes that would be good, TDI isnt too far from you so we should do a dyno day there.
-
Great result Paul, hub dynos are much better for big power cars. Well done mate
-
Hi Drew, welcome the the club.
-
Hi and
-
You need to check again mate, you must have a leak on the manifold somewhere or the throttle plate is open too far. It must be a big leak as well to be revving that high.
-
I have copy of the HKS fitting instructions and parts listing if required, make sure you use good quality braided hose and heat proof covering on all the lines. Especially the wastgate lines as these are prone to melting, you need to be careful how you route them as well as its very tight on the Twin kit.
-
Hello & welcome
-
Very nice.
-
Yes, I want to do llandow next time there is a club session on. I have trouble with the noise limits at most tracks though, which is a pain. Nice big drag radials.
-
Exactly The is what makes the blitz car very interesting as it has a custom made twin turbo kit which will flow around 600hp.
-
Thanks for doing that Ian
-
Na Aero to Big single 6 speed Aero Project
Lee P replied to supradibbs's topic in mkiv Supra Projects
Pics Few things still to get finished and then some tidying up. Not long to go now. -
Hi Wez can you update mine please. 825 bhp @ hubs 627 ftlbs @hubs 1.9 bar V-power + Xylene
-
Thanks guys.
-
Hopefully If I can run at thunder road, I will get a camera mounted properly inside.
-
Thanks Hopefuly Jamie will be giving me some lessons soon.
-
Yes it is, designed to be stuck on top of the dash but I took it apart and mounted it in the stock postion. Alot of work but well worth it.
