Lee P
-
Posts
3777 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Lee P
-
Only need one, the syvecs web prices may not be upto date Tim's prices are and the cable is shielded
-
The restrictor ring will be quite far back though You can try it
-
You could try but the angle will be wrong also I would sell it and buy the right one. 3" is a bit big for stock j specturbos anyway
-
That's a double decat for a UK spec
-
What colour is the smoke? Does it smoke on start up?
-
Finished a lot of the little jobs on it now and its base mapped. Jay is picking it up Saturday and taking it away for a while to finish running it in properly.
-
Yes, works with stock flywheel
-
For 600hp I would go with the spec stage 1 Will easily handle the power, will drive like stock with a slightly heavier peddle and costs £600
-
Its because the centre plate is segmented basically like a paddle clutch. If you want it to drive like stock you need an organic plate. If the juddering annoys you, buy a stock 6 speed clutch plate from Toyota and swap it over. The stage 3 is only for really big power/torque, stage 1 is fine for most cars. If you have a w58 you may have to put up with it as the stock plate won't take TT power but the 6 speed is fine
-
This is normal for that clutch plate, should have got the stage 1 if you want it to drive like stock
-
I can get them but may take a few weeks
-
The boost cut is obviously not set low enough, Syvecs will do it
-
Thanks, really appreciate the feedback
-
On my car I had to use silicone hose instead of braided. With the twins it was so tight that braided line would get too hot and melted the pipe internals
-
no its discontinued now
-
Good point, thanks Jamie
-
That's a good idea Jamie, will do that. Will be easier as well as its a screw type
-
There is only one other oil cap available for the supra now which is the TRD, that comes in around £90 We wanted to offer an alternative and I'm really please with how this has come out. Billet aluminium cap with SRD logo. A nice finishing touch to any engine bay First batch will be in very soon. £65 + delivery
-
Second cat will fit
-
You would be better off having an airbox that the filter was mounted in and then use an ac matrix similar to the one inside the car. Air going into the engine gets chilled first as it goes past the matrix Blowing cold air on the filter won't do much as it won't be able to keep up with engine demand.
-
No probs, prices are in the thread Pulley set £199.99 Aux pulley £69.99 Delivery £10 http://www.mkivsupra.net/vbb/showthread.php?287855-*New*-SRD-Pulley-Sets
-
Yep in stock
-
No problem at all
-
Black smoke on cold start and possibly missfire for a short time Hard to hot start and again possible missfire that clears, black smoke
-
Yep, its an aristo engine or turbo side
