Lee P
-
Posts
3777 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by Lee P
-
Will pm you Thanks
-
A few products from HKS are on very special discount at the moment All prices are plus vat and deliver Please let me know if anything is of interest The last 3.4L stroker kit SOLD HKS Oil cooler kit R-Type £735.67 + vat. (£845 + vat retail) HKS F con Harness VVTI £65.88 + vat (£296.45 + vat retail) HKS 87mm pistons 2JZ £1033.61 + vat (£1165+ vat retail) HKS Intake cam 272 £300 +vat (£375+ vat retail) HKS Hyper SS 2JZ-GE N/A £339 + vat (£565 +vat) Selection of 60mm HKS gauges (will add later)
-
Very lucky
-
All ready for collection
-
As already mentioned it depends on the abs really. Will still fit the car but may need a different bracket and trimming if there are cables in the way Unfortunately although the chassis are all the same different cars have different spec ect This means a bit of tweaking will be needed on installation depending on the car
-
-
Won't need a resistor pack, just a top feed fuel rail and the fittings and lines to go with it
-
Haha... I thought you might like it Steve Thanks Luc, yes oil cooler is fitted. Wanted to keep it looking stock and the stock rad is in great condition. Also has PS cooler
-
360ftlbs before The meth is very cheap and you only need 20-30% mix so he can run it as much as he wants.
-
You get one guess lol
-
That wasn't the point of what we were doing, you seemed to have missed that. The turbos were already on the car, we have pushed them as far as they will go and the car is now fully setup for a single turbo. Also 540ftlbs is very impressive, its not all about power. Torque is far more important and it has plenty of that.
-
Intake pipe finished and painted SRD intercooler plate finished in black Cold air box and cover finished and painted We also fitted an SRD rad plate in black. Engine bay is pretty much finished now, think we achieved the stock stealthy look No officer its completely stock, it doesn't have 700hp
-
That's exactly right Luc
-
Jay has the car, he's not using it much because of the weather. We will be getting it back at some point to push it a bit further
-
They have been sent to you already could find you. Can you pm me your phone number
-
Thanks guys great result today Im very happy with it We used a 30% mix of methanol
-
Thanks guys, I've updated first post and have sent most out already.
-
Thanks John appreciate it. Ashley is a very good fabricator, what ever I can think up he can make lol I like pushing his skills to the max
-
In keeping with the stock feel of the car we have fitted a HKS dump valve but recirced it back in to the intake system as Kim didn't want the sound.
-
Kim wanted a discreet install so we are building some covers to go over the turbo system. These will all be painted black when completed. Cold air box
-
****Best me to it lol....,**** You don't have to strip it, undo the 2 bolts in the engine bay that hold the loom on Unplug everything down by the ecu There are a few plugs that plug in to the car aswell as ecu Then pull the whole loom through from the engine bay side, be careful not to damage plugs or wires
-
I have one in stock if needed
-
Just to let you know as well we are focal dealers and have a good stock of speakers If you are wanting any at the same time please let me know Thank you
-
Sorry, if I've missed anyone else out please let me know I have no internet on my PC at the moment so working from my phone which is a bit of a pain lol..
-
Thank you, its all keyed up but not stripped back completely
