Lee P

Thor's dyno figures are flywheel figures which it clearly states at the top of the printout if you check it. They always claim its at the hubs but it never is.

If you dont want big horse power the you wont need injectors or the managment, you can go single and run on the stock ecu and injectors fine. You would have to uprate the pump though. You would get 420bhp without any probs but the torque from the single would be the big benifit. You can use the stock air box if you want but it would need modification. I would uprate the side mount but keep an eye on the intake temps. Lee

No they will be different profiles, they will fit as the head is the same but the profiles will be different.

Looks like its plumbed in ok, I would be checking for melted pipes or leaky conections, what problems is he having?

The side port of the wastgates need to be connected to the intercooler piping before the throttle body and the NC port on the boost controller needs to be t'ed into this aswell. The top port on the wastgates needs to go to the COM port on the boost controller. Make sure he uses braided line on the pipes, other wise the pipe will melt and you will loose boost control

Probly the big metal bar that sits behind the bumper. Sorry to hear that. Hope you can fix it.

Just to let you know, there is no english manual. If you want to know how to plumb them in correctly I can tell you. Is he running a boost contoller of anykind and if so which one. Lee

This is the review in turbo mag http://www.sp-power.com/pressroom/pressinfo.php?id=10

Been done, turbo magazine did a write up some years back with dyno runs. Its on the SP web site some where.

Take it to Olly at Owen Garages Haywards Heath, he's a friend of mine and he can do pre mot checks. I think he charges £10. 01444 452890. Give him a bell, tell him I passed on the number Lee

How are they plumbed in at the moment?

pm'd

Bumpski! Will take on offer on these. Need the space.

Is there a part number on of any kind? Garrett turbos normaly have a plate on the centre section with the details on. Then you can check ot on the garrett web site.

Hi & Welcome.

Yes it just needs power and earth so its not a problem to do.

SOLD I have my stock seats for sale from my GZ. They are black leather fronts and I think the rears are black vinyl but to be perfectly honest I cannot tell the difference, so if they are vinyl they are very good. The front drivers side is full electric. In the picture of the rears you can see an indentation in them, this is because I have just got them out of my loft and there was something else laying on top of them. This will come out no probs once they have been left for a while. Apart from that they are in mint condition, no rips or burns of any kind. I would prefer them to be collected as sending them would be a PITA. Thanks

Hi and

Hello & welcome.

£50.00

And its a replica.

Well done guys.

Hi, welcome to the club.

You want 12J wheels on the back of a TRD supra really to make the most of the wide arches.

Nothing wrong with mine on 19s, it handles better if you ask me, just a bit firmer.