snake
-
Posts
2174 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by snake
-
Get some brake disk cleaner spray to clean the new discs i think i bought 1.5 litres of brake fluid to flush all the old stuff out . Don't let the master cylinder empty when you bleed the brakes or contaminate the new pads/discs i think i just painted my calipers with black hammerite years ago . To get the old discs off the hub there are two threaded holes in the disc to put bolts in to eaze them off.
-
The pins are about £1.60 each so cheap to replace. The discs about £60 each. just measure the thickness of the ones on the car to see if they are below the recommended limit. An ezibleed kit about £7, if the fluid has not been changed for a while its worth bleeding all the old stuff out with new. If a caliper pin is rusted in then the fun begins .
-
i use ebc red stuff , just put some on my bpu supra this week . if you are doing it yourself buy a new set of caliper pins before you start.
-
42304-14020 /42305-14020 - Does these parts include the hub bearing
snake replied to ManwithSupra's topic in Supra Chat
ring your local toyota garage they will tell you. -
managed to get some from a local motor bike shop of all places
-
Thats what i thought but i cant get any crush washers that size
-
I have just removed one of my uk 4 pot callipers to remove a seized pin. I now need two new copper washers for the braided line banjo.They appear to be 10mm ID x 14mm OD x [1.14 mm thick.after being crushed down] Do i need to use copper crush washers if so where can i get them in this size Thanks
-
Try toyota ask for some discount it may work out cheaper than halfords
-
I have replaced the auxillary belt tensioner bearing the part number NTN 6203LHA from Q.B.O bearings,
-
1. quick make like a statue and know one will notice 2.yes you were right ,half an inch shorter on the skirt and you would have seen where my bell ended. 3.wow thats what you call a super fart.
-
no it gets worse, if you spay some wd40 on the joint by the bearing the noise goes for a while.I have taken the the pully off and can tell the bearing has gone .I have now removed the bearing ready to fit the new one when it arrives.
-
Thanks paul i have managed to find one today but it wasn't easy. i should have checked here first . out of interest what do you supply the ntn 6203 lh bearing for.
-
I have removed the auxilary pully no problem [thanks for advice iky],but as i expected trying to find a bearing number [ NTN 6203 LH ] is proving difficult even though it has been used on many different cars. i will have to make a few phone calls to find if there is a similar bearing.
-
Thanks bob, just wanted to make sure they were the uk spec brake disc part numbers .
-
i hope it just comes of the shaft,the difficult part may be trying to find a bearing to fit it .
-
if thats including vat thats a really good price well done, mr T wants £126 including vat from me
-
That makes sense, does the pully then come off the shaft after undoing the 14mm bolt or is the bearing a press fit on the shaft. cheers
-
can anyone confirm the correct part numbers for the uk spec front disks from mr T are the following part numbers correct T43512-14200 T43516-14030 cheers
-
How do you take the tension of the belt so i can just remove the pully to replace the bearing [if i can get a bearing] ?
-
The bearing in my auxiliary belt tensioner sounds like it may need replacing. Has anyone managed just to replace the auxiliary bearing or does the whole unit need replacing.
-
Japfest 2013 - Saturday 11th May 2013 @ Castle Combe Circuit
snake replied to lui's topic in National Events
i have paid but its not showing on list yet lui -
Japfest 2013 - Saturday 11th May 2013 @ Castle Combe Circuit
snake replied to lui's topic in National Events
i had a bit of trouble but worked it out in the end have now paid -
Japfest 2013 - Saturday 11th May 2013 @ Castle Combe Circuit
snake replied to lui's topic in National Events
31. snake +1 [ 1 club stand pass and 1 car pass ] [paid] -
energy
-
buck
