mrboost

J spec injectors but the HLS AFR pumping another 7% on tickover and increases with boost

Spec as follows :- I started with 324 standard supra, with exhaust and hks induction on rollers for rev bob talk show. Spec now....need her rolling again, but just going on what tuner told me. HKS Super drager exhaust, HKS Induction kit, HKS Super SQBOV Cats removed, Fluidyne Alloy radiator and cap, Greedy, Blitz hard pipe kit. Engine cooler Kit & Oil Filter relocation, Gearbox cooler Blitz FMIC (Front mounted Intercooler). WALBRO 255 uprated fuel pump. TRL Performance DSC and VFCC. HKS, TRL FCD (fuel cut defender), HKS Super AFR, Blitz SBC-ID Series II boost controller. Does that sound about right or is it way off the mark ? Roll on the good weather, so i can get on rollers. Would be nice to know.

anyone now the max bar reading for stock turbo's as hitting 1.56bar now. Can I go Higher ? stock J turbos good for a max of 550 bhp ? Boost

[all them amps going to slow you down lad [/b] only got 3x 4 channel amps in. I reckon its the speakers that will!!!. Like having the cast of fat friends in the back seats:D Its just more of an excuse for more power to sub the weight disadvantage

thanks matt.. will check em myself tonight

no happened at the audio shop. They could not work it out, so I'm left with no heater. Typical Audio bods (no offence to ice installers) BUT if you want something done right then your sometimes better off doing it yourself

Hi Guys Took car in to sort my hi fi out been sounding bad for a while.. Turns out bacl speakers were blown and one amp was down. Hifi now sounds great but the heater and air con light up but do not switch on. No lights on them only lights on when you switch the road lights on. Checked all the fuses, never had a problem before could it be the relay ? anything else i should check ? I have check the connections at the back and all is plugged in okay. Boostie

Anybody got any install tips on fitting the fluidyne radaitor on a mkiv TT Auto ? Also could use a bit of help on fitting a auto transmission gearbox cooler and engine cooler. Boostie

Well I got done fron the front number plate on the supra the same size as the apperture, I had the stuff from DVLA and the stuff from my mate at the mot station. He also said this to me" They are no way legal, you will have to buy two UK bumers then" WTF!!! I have not replaced the plates as the car is off the road AGAIN! But the same copper two weeks later did me again in the ST24. He did me for the letters being 2.7" high and not 3"...He did not measure it just new, also the ST24 logo on side of plate as GB are the only ones legal. No fine, just a Vehicle defect form... Took it to my mate who stamped it all done.....till next time. The copper just laughed when I showed him my DVLA Stuff. If you check http://www.southyorkpolice.co.uk and check number plates out. Boost

You can convert it to miles and if you look in the auto trader you will also find oddmeter corrdtions etc. You send them you odd meter and they will change it to the CORRECT miles not KHM. But I reckon this is open to CLOCKERS aswell Boost..

Hi guys A Top weekend, Did not manage to meet you all, as I moved my car to a tuning stand and completly the otherside of the show. Left a 2pm as had to be back for the little one. Top weekend and we did not let the rain spoil the day. Boostie

Have to give it a miss i'm afraid, car still of road waiting for my hks cooling parts. boost

It cost glen 6.5K to convert from auto to manual.

Thats your anwser MGB Sorry MGB not been posting for a while, too busy building yours and others pc up. Thanks Martin F Boost....still no rad :-(

Does anyone now where I can get a uprated radiator from ? As mine went pop down at max weekender :-( Toyota want 300 quid for a recon, replaced two on the MKIII Turbo and think I can get better quality one going uprated. I want one made from metal not plastic and metal as it always cracks on the plastic! Boost

Thanks Mate for the pics. Very useful and have managed to put them in. Cheers again Matey Martin

Yep. That would be good. I properly (hoping) I can knock up some base frames, my great ideas at first have been slashed. Orginally I wanted to fit these seats (supra seats are pants, keep sliding out of them). So I wanted to keep the drivers side fully electronic and just swap the seats of using the same base frames. This is not possible, so i will except a manual operation seat, but I can see no way that i can actually fit the seat. I ideally would like a picture of your base frame and where it mounts. Don't mind drilling the floor, but seats are usually fitted to the chassis or a solid structure. Your help would be apprecatited. Cheers Martin

I have got some recaro seats and was going to fit them to the supra, but can't seem to source base frames. Any chance of a pic, of the base frame (sub frame) with anyone with the new style recaros in ? or does anyone no where i could source these or get them made ? recaro UK say no Toyota Supra has them ? Boost

Thanks Peter. I think you may be right. and thanks for the correct procedure too:)

Does anyone know of the sst (Special Service Tool) number of the spark plug cleaner. I wanna clean me hks plugs. Boost

or when i sneak up on you and go BOO in you ear!!!

anyone turned traction of and spun the wheels ? The powermeter goes AWOL but remeber it will want calabrating again. Can you beat 1250 BHP!!!!! Boost.... very sad but fun!

cheaper than £80 ? boost

How easy are these to fit? Anyone here done it on the Auto ? Boost

The Auto box is good for 500-550 BHP I've just got her set up right (whiplass everytime you sink the throttle nice) She's just over the 500nhp, my turbos are melting everything falling apart!!! the damn hoses blow off. need nice new turbos, one gearbox, hard pipes all round and by the time they are fitted I bet something else has to be modded. Damn boost bug, its cost me a arm and a leg! but well worth it!