Gazzawu

Hi Ian, I've had this for about 3 years but never really had the time to fit it and recently my car has been stolen so i am making a massive clearout at the moment. The item comes with everything as it is still new in box. I paid about £200 for it at the time. Price does not include postage but i am assuming this will be about a fiver. Cheers Gary

Unopened Brand New in box 52mm Comes with Bosch sensor £120

Hi Guys not driven the supra for ages because iv got 2 cars and had no room for the supra. The car has been parked at my friend's car park for the last two months until he text me today that the supra is not there anymore!!!! If you guys spot a Royal Pearlescent Sapphire (Bluish-purple) supe with reg P402AAA in Glasgow, please do not hesitate to contact me. It's got distinctive 19 inch chrome piaa alloys. My mob is 07931 795 463 Thanks Gary

so how do you unseize them?

Hi there Iv left my car at my friend's for a year now and i tried to start it up but obviously wont start up cos battery is flat so tried to push it out into the road. Unfortunately gear wont shift from Park so had to press the red button until I could shift back to Neutral. Released the hand break and two of my m8s tried to push it......no luck..... just rocking movements. Tyres look a bit flat so they can do with more pressure. Can the brakes seize up if the car has been stationery for that long? Any suggestions everyone?

i did have a good website but i cant find it. im looking for a good place for diy oil lines and adapters. anyone have any good places to shop?

Hi there im going to fit my wideband by replacing one of the narrowband oxygen sensors. I read somewhere (supraforums i think) you can link the 2 connectors together simply by joining two pins in the diagnostics port- is that true? now i spent a couple of mins yesterday to check the diagnostics port and im assuming u can stick a paper clip into the ox1 and ox2 pins?

hi im looking for the p/n for the exhaust manifold on the N/A. was wondering if anyone can help. cheers

zoopseal from envyperformance will do the job. ask gaz. However its quite expensive and its a pain in the behind to apply the stuff

I went to change the plugs yesterday and discovered loads of thread dangling about on the engine bay. Upon removing the spark plug cover I noticed that there was wear on one side of the belt. Although having said that the belt was changed like a year and a half ago. I even supplied an original toyota belt. Ive only done about 15000 miles since then. Anyway the timing belt needs to get changed. Is there anything else that should be changed whilst the mechanic is in there? Got water pump, tensioner pulley, auxillary belt..... anything else? And a rough quote as to how many hours for the job will be great.

impressive stuff dave. is that the same setup as ur 9sec supra?

http://www.leightyres.co.uk website is a bit rubbish but theyr really cheap. give them a call

the rear lights suit the silver paint. great job

hi dave welcome to the club. think i emailed u a few times for advice about 3 weeks ago. really impressive stuff uve come up for the NA guys. keep it up.

why have u put a r154 in a mkiv before?

safest thing to do is straight with the toyota atf.

if ur lucky go for a r154 box from a mkIII (cheap as chips and plenty of them around) and mate that with a 1jz bellhousing and flywheel. boostlogic have recently launched a kit to do this. the r154 should be ok for up to 700rwhp. however personally i would go for the getrag 6spd. but ur gonna have to change the whole drivetrain for this.

get the skyline and keep the supra. best of both

interested in stage 3 clutch

the safc works quite nicely for your needs. get yourself a wideband as well and you can tune it yourself. you gotta ask yourself how much power you want before you can decide what is best for you. mind you the stock fuel system is good enough for up to 300rwhp. if you're auto maybe thats all you should be looking for

oh well then. [OOPS][/OOPS] Sent an email of complaint and was going to phone to give them an earfull treatment. glad i didnt

Right i ordered a walbro fuel pump but i received one from FSE sytec. Emailed the trader to complain and he said that sytec FSE are the sole distributor in the UK and the fuel pump is definately a Walbro one. Can anyone confirm that?

prob about £220

Im thinking of changing my setup so ive got a brand new emanage blue. comes with main loom and additional injector and ignition harnesses. All items are still in their packaging and there is a stamped warranty card as well which should run out next aug. Not made up my mind yet so just going to post this up to see how many people might be interested. cheers gary

alrite! cheers