Jump to content
The mkiv Supra Owners Club

absz

Club Members
 View Profile  See their activity

  • Posts

    2466

  • Joined

 Content Type 

Everything posted by absz

  1. absz
    you can remove the crankshaft sensor a poke your little finger in there to see if you can feel anything loose:D
  2. absz
    Nothing wrong with piggypacks:D
  3. absz
    yes you need to wire in the injector adaptor module on the supras.
  4. absz
    The piping will not prevent the engine from starting EDIT the skyline engine has a airflow meter so you will be correct in that case:) but the supra has a map sensor unless its a uk spec.
  5. absz
    Error code 12 and no signal to the rpm needle, you need to have another look at the crankshaft sensor it MIGHT not be the sensor itself but the pickup signal ring gear as i have mentioned before.
  6. absz
    Might be a sticking actuator valve or possible leaking wastegate, Just my 2pence worth.
  7. absz

    Nippon (STAY AWAY)

    absz replied to a topic in Supra Chat

    If i have read this right, you bought a secondhand gearbox from nippon which lasted 3 years - cannot fault them for that if it was me. Oil they used was not typeIV ? how do you know this as the atf oils are the same colour ? did you have it tested. i've never used nippon but agian seems a bit unfair
  8. absz
    With a good battery you should be getting approx 1-2 volts AC cranking 0.3 seems a bit low to me. if the crank signal is being recieved by the ecu then while you are cranking you should see the rev counter needle moving (bouncing) very slighty. Did you check for a spark at the plugs when the coilpacks were changed
  9. absz
    There are two cam sensors fitted under the intake manifold but if one has gone faulty then the engine will still start. The crankshaft sensor is located at the crankshaft pully end. under the alternator there is a connection plug for the crank sensor is that the one you have checked? if so how did you check this
  10. absz
    Engine speed signal comes from the crankshaft sensor you need to check that with a multimeter
  11. absz
    Sounds like crankshaft sensor Or the star-ring which is pressed on the crankshaft gear which is for crank sensor signal
  12. absz
    The oil will be leaking from the sensor itself were the metal part crimps onto the plastic bit. just replace with new job done.
  13. absz
    Have you checked for Vaccum leaks especially around the fuel pressure regulator.
  14. absz
    Well done mate great car quality stuff
  15. absz
    I see you did't take my advise then !!! LOL
  16. absz
    Just completed payment for the headlights!!!
  17. absz
    I'll take the headlights can you please pm me paypal addy and postage
  18. absz
    I now have a bonnet so no longer required ! just headlights left
  19. absz
    Do you have any pictures would like some that don't need too much work doing to them?
  20. absz
    how much for the UK lights with HID's?
  21. absz
    Thanks,can you also pm me a price.
  22. absz
    looking for a single turbo downpipe 3" V-BAND on turbo side,will take any other size depending on price.
  23. absz
    Required pair of front headlights jspec or uk
  24. absz
    i have a few in our workshop 208ltrs collection is luton bedfordshire, if its not too far ?
  25. absz
    How much do you what for yours ? i'll take it depending on price
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue. You might also be interested in our Guidelines, Privacy Policy and Terms of Use.