absz
-
Posts
2466 -
Joined
Content Type
Profiles
Forums
Store
Blogs
Events
Downloads
Supra Articles
Gallery
Everything posted by absz
-
wanted stock rear passenger plastic trim arch
absz replied to Jurgen-Jm-Imports's topic in Parts Wanted
i have one you can have just pm me the post addy:) -
GUYS THIS THREAD IS COMING UP TO 5 YEARS NOW, PAINT NO LONGER REQUIRED:d
-
i see a future MOD in the making:D
-
i'm sure they are the same as said the saloon and estate are different
-
i'm not going to strip it all down just to take some pictures:p
-
mine are tapered and have a seat in them for a tight fit to the injector, also the rubber seals are flat and not like normal o-rings. i guess you can try Whifbitz ?
-
Not for me now selling the car, i have a standard body 6 speed that i'm working on at the moment.
-
That was from the top secret company, no one had a car in top secret gold to compare against for a colour match only from web pictures.
-
i seem to remember it being approx £200 per litre and i needed 7ltrs back then:blink: did go for the vauxhall titan gold for a few years and then sprayed it back to black:)
-
You need the collets and rubber washers that go between the injector and inlet housing or can just weld them in as per homers picture
-
Seems cheap for a widebody kit, it will most proberly need modifying and beefing up for a good fitment so the labour to the bodyshop goes up. swings and roundabouts:innocent:
-
There IS not alot you can do he will only submit to ebay that the item is no longer available due to damage. case closed
-
Was there a flood then:d
-
good luck, hope it works out for yah:)
-
HKS EVC4 electronic boost solenoid i have misplaced mine and cannot find it. Also decat pipe new or in very good condition.
-
CD player and cassette combo taken from a jspec supra Added additional pics as requested:)
-
^^
-
must remember to read entire post before replying:innocent:
-
it seems that you have been outbid:d (not getting the bubble wrap back then ? )
-
not closing will under boost or make very low boost , will not allow the engine to overboost
-
still a day to go
-
£31:p
-
As said above no problems with fitment or gas. i have my own gauge set and cylinder which fits all modern cars including the SUPRA
-
I have used britool right from my apprentice days and do recommend them highly:) also you cannot go wrong with teng-tools and facom. on a budget the draper Expert are not too bad, if using air tools then you need a compressor with a big capacity i use a 200ltr sealey at home and seems to cope will. PS forgot to add the halford professional range are also of very good quality comes with breakage warranty
-
i'll take one please as a spare:) can you pm the payment details.
